CJ1W-NC414 Omron, CJ1W-NC414 Datasheet - Page 164

• Manufacturer Part Number: CJ1W-NC414
• Description: High Speed Pulse Train 4 Axes
• Manufacturer: Omron

Specifications of CJ1W-NC414

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5
5-1 Overall Structure
5-3
Parameters and Memory Areas List
Parameter Data
Memory Area
The table below shows 11 types of data and memory areas which the PCU handles.
Common
parameters
Axis parameters
Memory operation
parameters
PCU Control
Memory areas
Manual Operation
Command
Memory areas
Direct Operation
Command
Memory areas
Axis Status
Memory areas
Memory Operation
Command
Memory areas
Memory Operation
Status Memory
areas
Data name
Data name
These parameters set the basic allocations in the
Direct Operation Command Memory area which are
necessary to operate the PCU.
You must set common parameters when you use the
PCU.
These parameters set the pulse output method,
input signal logic, command position unit, maximum
speed of each axis, and other items that relate to
axis operation.
These parameters set the configuration axes,
interpolation operation and other items that relate to
memory operation.
Data read/write, error reset, error flags, error codes
and other items that relate to the PCU status are
allocated in these areas.
Servo lock, Origin Search, JOG, inching, Origin
Return and other items that relate to manual
operation are allocated in these areas.
Position data, speed data, acceleration/deceleration
time and other items that relate to direct operation,
as well as starting bits for relative movement,
absolute movement, etc. are allocated in these
areas.
Busy flag for input status, servo locking, positioning
completed, zones, axis error codes, present position
monitor and other items that relate to axes are
allocated in these areas.
Sequence numbers for output status, M code reset,
teaching address and other items that relate to
memory operation are allocated in these areas.
Memory operation errors for input status, memory
operation error codes, M strobes, M codes and other
items that relate to memory operation are allocated
in these areas.
CJ Position Control Units OPERATION MANUAL (CJ1W-NC214/234/414/434)
Description
Description
Internal flash memory of the
PCU
PLC special I/O Unit area
Use the CIO area, WR
area, HR area, DM area
and EM area in the PLC.
Use common parameters to
set these areas.
Setting location
Setting location