CJ1W-NC414 Omron, CJ1W-NC414 Datasheet - Page 90

• Manufacturer Part Number: CJ1W-NC414
• Description: High Speed Pulse Train 4 Axes
• Manufacturer: Omron

Specifications of CJ1W-NC414

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

2
2-8 Wiring Check with CX-Programmer
2-8 Wiring Check with CX-Programmer
2-51
Operating Procedure
1. Connect online to the PLC via CX-Programmer.
2. Open the data setting window of the PCU.
3. Click the [PCU] on the menu and select [Test Run].
You can use CX-Programmer to check the wiring.
Manually operate the I/O signals of the Servo Drive connector and external signal connector,
except for the pulse I/O signals. Check the wiring of pulse I/O signals by manual operation such
as JOG operation. For manual operation, refer to "Outline of Manual Operation" on page 3-1.
When the caution dialog box below appears, read the message carefully. After you confirm a
safe condition, click [OK].
page 3-1.
When you click [OK], the PCU enters the SOFTWARE EXCLUSIVE mode (Test Run).
For the SOFTWARE EXCLUSIVE mode (Test Run), refer to "Outline of Manual Operation" on
Precautions for Correct Use
CJ Position Control Units OPERATION MANUAL (CJ1W-NC214/234/414/434)