HD6417751RF240V Renesas Electronics America, HD6417751RF240V Datasheet - Page 211

• Manufacturer Part Number: HD6417751RF240V
• Description: MPU 1.5/3.3V 0K PB-FREE 256-QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417751RF240V

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 240MHz
• Connectivity: EBI/EMI, FIFO, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 39
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 256-QFP Exposed Pad, 256-eQFP, 256-HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

4.3.4
In order to give priority to data reads to the cache and improve performance, this LSI has a write-
back buffer which holds the relevant cache entry when it becomes necessary to purge a dirty cache
entry into external memory as the result of a cache miss. The write-back buffer contains one cache
line of data and the physical address of the purge destination.
4.3.5
This LSI has a 64-bit buffer for holding write data when writing data in write-through mode or
writing to a non-cacheable area. This allows the CPU to proceed to the next operation as soon as
the write to the write-through buffer is completed, without waiting for completion of the write to
external memory.
4.3.6
Setting CCR.ORA to 1 enables 8 Kbytes of the operand cache to be used as RAM. The operand
cache entries used as RAM are the 8 Kbytes of entries 128 to 255 and 384 to 511. In SH7751-
compatible-mode in the SH7751R, the 8 Kbytes of operand cache entries 256 to 511 are used as
RAM. In cache-double-mode in the SH7751R, the total 16 Kbytes of entries 256 to 511 in each
way of the operand cache are used as RAM. Other entries can still be used as cache. RAM can be
accessed using addresses H'7C00 0000 to H'7FFF FFFF. Byte-, word-, longword-, and quadword-
size data reads and writes can be performed in the operand cache RAM area. Instruction fetches
cannot be performed in this area.
Note that in the SH7751R, OC index mode cannot be used when RAM mode is used.
An example of RAM use is shown below. Here, the 4 Kbytes comprising OC entries 128 to 256
are designated as RAM area 1, and the 4 Kbytes comprising OC entries 384 to 511 as RAM area
2.
Physical address bits [28:5]
Write-Back Buffer
Write-Through Buffer
RAM Mode
Figure 4.5 Configuration of Write-Through Buffer
Figure 4.4 Configuration of Write-Back Buffer
Physical address bits [28:0]
LW0
LW1
LW2
Rev.4.00 Oct. 10, 2008 Page 111 of 1122
LW3
LW0
LW4
LW1
LW5
REJ09B0370-0400
LW6
4. Caches
LW7