R7M-AP10030-BS1 Omron, R7M-AP10030-BS1 Datasheet - Page 2

• Manufacturer Part Number: R7M-AP10030-BS1
• Description: MOTORSERVO FLAT 100W W/BRAKE&KEY
• Manufacturer: Omron

Specifications of R7M-AP10030-BS1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: R7MAP10030BS1

Items to Check Before Unpacking
Thank you for choosing this SMARTSTEP A-series product. Proper use and handling
of the product will ensure proper product performance, will lengthen product life, and
may prevent possible accidents.
Please read this manual thoroughly and handle and operate the product with care.
Please keep this manual handy for reference after reading it.
10. Servomotors and Servo Drivers have a finite service life. Be sure to keep replacement products on hand
11. Do not set values for any parameters not described in this manual. Operating errors may result. Consult
12. Before using the product under conditions which are not described in the manual or applying the product
1. To ensure safe and proper use of the OMRON Inverters, please read this USER'S MANUAL (Cat. No.
2. The products are illustrated without covers and shieldings for closer look in this USER'S MANUAL. For
3. This USER'S MANUAL and other related user's manuals are to be delivered to the actual end users of the
4. Please keep this manual close at hand for future reference.
5. If the product has been left unused for a long time, please inquire at our sales representative.
1. Check the following items before removing the product from the package:
2. Check that the following accessories have been delivered.
1. This manual describes information about installation, wiring, switch setting, and troubleshooting of the
2. Be sure that this manual accompanies the product to its final user.
3. Although care has been given in documenting the product, please contact your OMRON representative
4. Assume that anything not specifically described in this manual is not possible.
5. Do not allow the Servomotor or Servo Driver to be wired, set, or operated (from a Parameter Unit) by
6. We recommend that you add the following precautions to any instruction manuals you prepare for the
7. Specifications and functions may be changed without notice in order to improve product performance.
8. Positive and negative rotation of AC Servomotors described in this manual are defined as looking at the
9. Do not perform withstand-voltage or other megameter tests on the product. Doing so may damage inter-
I533-E1) to gain sufficient knowledge of the devices, safety information, and precautions before actual
use.
actual use of the products, make sure to use the covers and shieldings as specified.
products.
SMARTSTEP A-series Servomotors and Servo Drivers. For information about actual operating proce-
dures using a Parameter Unit, refer to the SMARTSTEP A Series Operation Manual (I534).
if you have any suggestions on improving this manual.
anyone that is not a profession electrical engineer or the equivalent.
system into which the product is being installed.
end of the output shaft of the motor as follows: Counterclockwise rotation is positive and clockwise rota-
tion is negative.
nal components.
and to consider the operating environment and other conditions affecting the service life.
your OMRON representative if you have questions.
to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical
equipment, amusement machines, safety equipment, and other systems, machines, and equipment that
may have a serious influence on lives and property if used improperly, consult your OMRON represen-
tative.
• Has the correct product been delivered (i.e., the correct model number and specifications)?
• Has the product been damaged in shipping?
• Safety Precautions
• Precautions on the dangers of high-voltage equipment.
• Precautions on touching the terminals of the product even after power has been turned OFF. (These
No connectors or mounting screws are provided. Obtain these separately.
terminals are live even with the power turned OFF.)
NOTICE