PIC18F27J53T-I/SO Microchip Technology, PIC18F27J53T-I/SO Datasheet - Page 161

• Manufacturer Part Number: PIC18F27J53T-I/SO
• Description: 28-pin, USB, 128KB Flash, 4KB RAM, 12 MIPS, 12-bit ADC, NanoWatt XLP 28 SOIC .30
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J53T-I/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 128KB (64K x 16)
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3.8 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 8
• Operating Supply Voltage: 2.15 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

10.7.3.1
The inputs of the PPS options are mapped on the basis
of the peripheral; that is, a control register associated
with a peripheral dictates the pin it will be mapped to. The
RPINRx registers are used to configure peripheral input
mapping (see Register 10-6 through Register 10-23).
Each register contains a 5-bit field which is associated
TABLE 10-13:
 2010 Microchip Technology Inc.
External Interrupt 1
External Interrupt 2
External Interrupt 3
Timer0 External Clock Input
Timer3 External Clock Input
Timer5 External Clock Input
Input Capture 1
Input Capture 2
Input Capture 3
Timer1 Gate Input
Timer3 Gate Input
Timer5 Gate Input
EUSART2 Asynchronous Receive/Synchronous
Receive
EUSART2 Asynchronous Clock Input
SPI2 Data Input
SPI2 Clock Input
SPI2 Slave Select Input
PWM Fault Input
Note 1:
Unless otherwise noted, all inputs use the Schmitt Trigger input buffers.
Input Mapping
SELECTABLE INPUT SOURCES (MAPS INPUT TO FUNCTION)
Input Name
Preliminary
Function Name
RX2/DT2
SCK2IN
PIC18F47J53 FAMILY
T0CKI
T3CKI
T5CKI
SS2IN
CCP1
CCP2
CCP3
FLT0
INT1
INT2
INT3
SDI2
T1G
T3G
T5G
CK2
with one of the pin selectable peripherals. Programming
a given peripheral’s bit field with an appropriate 5-bit
value maps the RPn pin with that value to that peripheral.
For any given device, the valid range of values for any of
the bit fields corresponds to the maximum number of
Peripheral Pin Selections supported by the device.
RPINR15
RPINR12
RPINR13
RPINR14
RPINR16
RPINR17
RPINR21
RPINR22
RPINR23
RPINR24
Register
RPINR1
RPINR2
RPINR3
RPINR4
RPINR6
RPINR7
RPINR8
RPINR9
(1)
RX2DT2R<4:0>
Configuration
DS39964B-page 161
INTR1R<4:0>
INTR2R<4:0>
INTR3R<4:0>
OCFAR<4:0>
SCK2R<4:0>
T0CKR<4:0>
T3CKR<4:0>
T5CKR<4:0>
SDI2R<4:0>
T1GR<4:0>
T3GR<4:0>
T5GR<4:0>
CK2R<4:0>
SS2R<4:0>
IC1R<4:0>
IC2R<4:0>
IC3R<4:0>
Bits