PIC18F27J53T-I/SO Microchip Technology, PIC18F27J53T-I/SO Datasheet - Page 82

• Manufacturer Part Number: PIC18F27J53T-I/SO
• Description: 28-pin, USB, 128KB Flash, 4KB RAM, 12 MIPS, 12-bit ADC, NanoWatt XLP 28 SOIC .30
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J53T-I/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 128KB (64K x 16)
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3.8 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 8
• Operating Supply Voltage: 2.15 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18F47J53 FAMILY
6.1.1
All PIC18 devices have a total of three hard-coded
return vectors in their program memory space. The
Reset vector address is the default value to which the
program counter returns on all device Resets; it is
located at 0000h.
PIC18 devices also have two interrupt vector
addresses for handling high-priority and low-priority
interrupts. The high-priority interrupt vector is located at
0008h and the low-priority interrupt vector at 0018h.
Figure 6-2 provides their locations in relation to the
program memory map.
FIGURE 6-2:
DS39964B-page 82
Legend:
High-Priority Interrupt Vector
Low-Priority Interrupt Vector
Flash Configuration Words
Program Memory
HARD MEMORY VECTORS
Reset Vector
(Top of Memory) represents upper boundary
of on-chip program memory space (see
Figure 6-1 for device-specific values).
Shaded area represents unimplemented
memory. Areas are not shown to scale.
Read as ‘0’
On-Chip
HARD VECTOR AND
CONFIGURATION WORD
LOCATIONS FOR
PIC18F47J53 FAMILY
DEVICES
0000h
0008h
0018h
(Top of Memory-7)
(Top of Memory)
1FFFFFh
Preliminary
persistent configuration memory, the top four words of
6.1.2
Because PIC18F47J53 family devices do not have
on-chip program memory are reserved for configuration
information. On Reset, the configuration information is
copied into the Configuration registers.
The Configuration Words are stored in their program
memory location in numerical order, starting with the
lower byte of CONFIG1 at the lowest address and
ending with the upper byte of CONFIG4.
Table 6-1 provides the actual addresses of the Flash
Configuration Word for devices in the PIC18F47J53
family. Figure 6-2 displays their location in the memory
map with other memory vectors.
Additional details on the device Configuration Words
are provided in Section 28.1 “Configuration Bits”.
TABLE 6-1:
PIC18F26J53
PIC18F46J53
PIC18F27J53
PIC18F47J53
Device
FLASH CONFIGURATION WORDS
FLASH CONFIGURATION
WORD FOR PIC18F47J53
FAMILY DEVICES
Program
(Kbytes)
Memory
128
 2010 Microchip Technology Inc.
64
1FFF8h to 1FFFFh
Word Addresses
FFF8h to FFFFh
Configuration