PIC18F27J53T-I/SO Microchip Technology, PIC18F27J53T-I/SO Datasheet - Page 188

• Manufacturer Part Number: PIC18F27J53T-I/SO
• Description: 28-pin, USB, 128KB Flash, 4KB RAM, 12 MIPS, 12-bit ADC, NanoWatt XLP 28 SOIC .30
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J53T-I/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 128KB (64K x 16)
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3.8 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 8
• Operating Supply Voltage: 2.15 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18F47J53 FAMILY
11.2
The primary mode of operation for the module is
configured using the MODE<1:0>
PMMODEH register. The setting affects whether the
module acts as a slave or a master, and it determines
the usage of the control pins.
11.2.1
In
PMPEN = 1), the module is configured as a Parallel
Slave Port (PSP) with the associated enabled module
FIGURE 11-2:
DS39964B-page 188
Legacy
Slave Port Modes
LEGACY MODE (PSP)
Master
mode
PMD<7:0>
PMCS1
PMWR
PMRD
LEGACY PARALLEL SLAVE PORT EXAMPLE
(PMMODEH<1:0> = 00
bits
in
and
Preliminary
the
PMD<7:0>
PMCS1
PMRD
PMWR
pins dedicated to the module. In this mode, an external
device, such as another microcontroller or micro-
processor, can asynchronously read and write data
using the 8-bit data bus (PMD<7:0>), the read (PMRD),
write (PMWR) and chip select (PMCS1) inputs. It acts
as a slave on the bus and responds to the
read/write-control signals.
Figure 11-2 displays the connection of the PSP.
When chip select is active and a write strobe occurs
(PMCSx = 1 and PMWR = 1), the data from
PMD<7:0> is captured into the PMDIN1L register.
PIC18 Slave
Address Bus
Data Bus
Control Lines
 2010 Microchip Technology Inc.