PIC18F27J53T-I/SO Microchip Technology, PIC18F27J53T-I/SO Datasheet - Page 341

• Manufacturer Part Number: PIC18F27J53T-I/SO
• Description: 28-pin, USB, 128KB Flash, 4KB RAM, 12 MIPS, 12-bit ADC, NanoWatt XLP 28 SOIC .30
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J53T-I/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 128KB (64K x 16)
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3.8 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 8
• Operating Supply Voltage: 2.15 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

FIGURE 20-29:
FIGURE 20-30:
 2010 Microchip Technology Inc.
SDAx
SCLx
SEN
S
BCLxIF
SSPxIF
S
BCLxIF
SSPxIF
SDAx
SCLx
SEN
BUS COLLISION DURING START CONDITION (SCLx = 0)
BRG RESET DUE TO SDAx ARBITRATION DURING START CONDITION
SDAx pulled low by other master.
Reset BRG and assert SDAx.
‘0’
‘0’
SCLx = 0 before BRG time-out,
bus collision occurs. Set BCLxIF.
Set SEN, enable Start
sequence if SDAx = 1, SCLx = 1
Less than T
BRG
SDAx = 0, SCLx = 1
SDAx = 0, SCLx = 1
SDAx = 0, SCLx = 1,
set SSPxIF
Preliminary
T
Set SEN, enable Start
sequence if SDAx = 1, SCLx = 1
BRG
S
Set S
PIC18F47J53 FAMILY
T
BRG
T
BRG
Set SSPxIF
SCLx = 0 before SDAx = 0,
bus collision occurs. Set BCLxIF.
SCLx pulled low after BRG
time-out
Interrupt cleared
in software
Interrupts cleared
in software
‘0’
‘0’
‘0’
DS39964B-page 341