PIC18F27J53T-I/SO Microchip Technology, PIC18F27J53T-I/SO Datasheet - Page 217

• Manufacturer Part Number: PIC18F27J53T-I/SO
• Description: 28-pin, USB, 128KB Flash, 4KB RAM, 12 MIPS, 12-bit ADC, NanoWatt XLP 28 SOIC .30
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J53T-I/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 128KB (64K x 16)
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3.8 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 8
• Operating Supply Voltage: 2.15 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

13.8.4
When Timer1 Gate Single Pulse mode is enabled, it is
possible to capture a single pulse gate event. Timer1
Gate Single Pulse mode is first enabled by setting the
T1GSPM bit in the T1GCON register. Next, the
T1GGO/T1DONE bit in the T1GCON register must be
set. The Timer1 will be fully enabled on the next incre-
menting edge. On the next trailing edge of the pulse,
the T1GGO/T1DONE bit will automatically be cleared.
No other gate events will be allowed to increment
Timer1 until the T1GGO/T1DONE bit is once again set
in software.
FIGURE 13-6:
 2010 Microchip Technology Inc.
TMR1GIF
TMR1GE
T1GSPM
T1DONE
T1GPOL
T1GVAL
T1GGO/
T1G_IN
Timer1
T1CKI
TIMER1 GATE SINGLE PULSE
MODE
TIMER1 GATE SINGLE PULSE MODE
Cleared by Software
N
Counting Enabled on
Rising Edge of T1G
Set by Software
Preliminary
N + 1
PIC18F47J53 FAMILY
Clearing the T1GSPM bit of the T1GCON register will
also clear the T1GGO/T1DONE bit. See Figure 13-6
for timing details.
Enabling the Toggle mode and the Single Pulse mode,
simultaneously, will permit both sections to work together.
This allows the cycle times on the Timer1 gate source to
be measured. See Figure 13-7 for timing details.
13.8.5
When the Timer1 gate value status is utilized, it is
possible to read the most current level of the gate
control value. The value is stored in the T1GVAL bit in
the T1GCON register. The T1GVAL bit is valid even
when the Timer1 gate is not enabled (TMR1GE bit is
cleared).
Set by Hardware on
Falling Edge of T1GVAL
Cleared by Hardware on
Falling Edge of T1GVAL
TIMER1 GATE VALUE STATUS
N + 2
DS39964B-page 217
Cleared by
Software