DF2398TE20 Renesas Electronics America, DF2398TE20 Datasheet - Page 351

• Manufacturer Part Number: DF2398TE20
• Description: IC H8S MCU FLASH 256K 120TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2398TE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 87
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 120-TQFP, 120-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2398TE20; HD64F2398TE20

9.11.4
Port D has a on-chip MOS input pull-up function that can be controlled by software. This MOS input pull-up function can
be used in mode 7, and can be specified as on or off on an individual bit basis.
When a PDDDR bit is cleared to 0 in mode 7, setting the corresponding PDPCR bit to 1 turns on the MOS input pull-up
for that pin.
The MOS input pull-up function is in the off state after a power-on reset, and in hardware standby mode. The prior state is
retained after a manual reset*, and in software standby mode.
Table 9-20 summarizes the MOS input pull-up states.
Note: * Manual reset is only supported in the H8S/2357 ZTAT.
Table 9-20 MOS Input Pull-Up States (Port D)
Legend:
OFF:
ON/OFF: On when PDDDR = 0 and PDPCR = 1; otherwise off.
Note:
*
MOS Input Pull-Up Function (On-Chip ROM Version Only)
MOS input pull-up is always off.
Manual reset is only supported in the H8S/2357 ZTAT.
Modes
7
4 to 6
Power-On
Reset
OFF
Hardware
Standby Mode
Manual
Reset*
ON/OFF
OFF
Software
Standby Mode
Rev.6.00 Oct.28.2004 page 321 of 1016
In Other
Operations
REJ09B0138-0600H