DF2398TE20 Renesas Electronics America, DF2398TE20 Datasheet - Page 576

• Manufacturer Part Number: DF2398TE20
• Description: IC H8S MCU FLASH 256K 120TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2398TE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 87
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 120-TQFP, 120-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2398TE20; HD64F2398TE20

16.3
ADDRA to ADDRD are 16-bit registers, and the data bus to the bus master is 8 bits wide. Therefore, in accesses by the
bus master, the upper byte is accessed directly, but the lower byte is accessed via a temporary register (TEMP).
A data read from ADDR is performed as follows. When the upper byte is read, the upper byte value is transferred to the
CPU and the lower byte value is transferred to TEMP. Next, when the lower byte is read, the TEMP contents are
transferred to the CPU.
When reading ADDR. always read the upper byte before the lower byte. It is possible to read only the upper byte, but if
only the lower byte is read, incorrect data may be obtained.
Figure 16-2 shows the data flow for ADDR access.
16.4
The A/D converter operates by successive approximation with 10-bit resolution. It has two operating modes: single mode
and scan mode.
16.4.1
Single mode is selected when A/D conversion is to be performed on a single channel only. A/D conversion is started when
the ADST bit is set to 1, according to the software or external trigger input. The ADST bit remains set to 1 during A/D
conversion, and is automatically cleared to 0 when conversion ends.
Rev.6.00 Oct.28.2004 page 546 of 1016
REJ09B0138-0600H
Interface to Bus Master
Operation
Single Mode (SCAN = 0)
Bus master
(H'AA)
Bus master
(H'40)
Lower byte read
Upper byte read
Figure 16-2 ADDR Access Operation (Reading H'AA40)
Bus interface
Bus interface
ADDRnH
ADDRnH
(H'AA)
(H'AA)
ADDRnL
ADDRnL
(H'40)
(H'40)
TEMP
TEMP
Module data bus
(H'40)
Module data bus
(H'40)
(n = A to D)
(n = A to D)