MC9S08JM60CLH Freescale, MC9S08JM60CLH Datasheet - Page 32

• Manufacturer Part Number: MC9S08JM60CLH
• Manufacturer: Freescale

Specifications of MC9S08JM60CLH

• Cpu Family: HCS08
• Device Core Size: 8b
• Frequency (max): 24MHz
• Interface Type: SCI/SPI
• Total Internal Ram Size: 4KB
• # I/os (max): 51
• Number Of Timers - General Purpose: 8
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2.7V
• On-chip Adc: 12-chx12-bit
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 64
• Package Type: LQFP
• Program Memory Type: Flash
• Program Memory Size: 60KB
• Lead Free Status / RoHS Status: Compliant

Chapter 2 Pins and Connections
2.3.7
The USBDP (D+) and USBDN (D–) pins are the analog input/output lines to/from full-speed internal USB
transciever. An optional internal pullup resistor for the USBDP pin, R
2.3.8
The MC9S08JM60 series of MCUs support up to 51 general-purpose I/O pins, which are shared with
on-chip peripheral functions (timers, serial I/O, ADC, keyboard interrupts, etc.).
When a port pin is configured as a general-purpose output or a peripheral uses the port pin as an output,
software can select one of two drive strengths and enable or disable slew rate control. When a port pin is
configured as a general-purpose input or a peripheral uses the port pin as an input, software can enable a
pullup device.
For information about controlling these pins as general-purpose I/O pins, see the
Input/Output.”
appropriate module chapter.
Immediately after reset, all pins are configured as high-impedance general-purpose inputs with internal
pullup devices disabled.
32
USB Data Pins (USBDP, USBDN)
General-Purpose I/O and Peripheral Ports
For information about how and when on-chip peripheral systems use these pins, see the
MC9S08JM60 Series Data Sheet, Rev. 3
PUDP
, is available.
Chapter 6, “Parallel
Freescale Semiconductor