MC9S08JM60CLH Freescale, MC9S08JM60CLH Datasheet - Page 35

• Manufacturer Part Number: MC9S08JM60CLH
• Manufacturer: Freescale

Specifications of MC9S08JM60CLH

• Cpu Family: HCS08
• Device Core Size: 8b
• Frequency (max): 24MHz
• Interface Type: SCI/SPI
• Total Internal Ram Size: 4KB
• # I/os (max): 51
• Number Of Timers - General Purpose: 8
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 2.7V
• On-chip Adc: 12-chx12-bit
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 64
• Package Type: LQFP
• Program Memory Type: Flash
• Program Memory Size: 60KB
• Lead Free Status / RoHS Status: Compliant

Chapter 3
Modes of Operation
3.1
The operating modes of the MC9S08JM60 series are described in this chapter. Entry into each mode, exit
from each mode, and functionality while in each mode are described.
3.2
3.3
Run is the normal operating mode for the MC9S08JM60 series. This mode is selected upon the MCU
exiting reset if the BKGD/MS pin is high. In this mode, the CPU executes code from internal memory with
execution beginning at the address fetched from memory at 0xFFFE:0xFFFF after reset.
3.4
The active background mode functions are managed through the background debug controller (BDC) in
the HCS08 core. The BDC, together with the on-chip in-circuit emulator (ICE) debug module (DBG),
provides the means for analyzing MCU operation during software development.
Active background mode is entered in any of five ways:
Freescale Semiconductor
•
•
•
•
•
•
•
•
Active background mode for code development
Wait mode:
— CPU halts operation to conserve power
— System clocks running
— Full voltage regulation is maintained
Stop modes: CPU and bus clocks stopped
— Stop2: Partial power down of internal circuits; RAM and USB RAM contents retained
— Stop3: All internal circuits powered for fast recovery; RAM, USB RAM, and register contents
When the BKGD/MS pin is low at the rising edge of reset
When a BACKGROUND command is received through the BKGD pin
When a BGND instruction is executed
When encountering a BDC breakpoint
When encountering a DBG breakpoint
Introduction
Features
Run Mode
Active Background Mode
are retained
MC9S08JM60 Series Data Sheet, Rev. 3
35