r8a77850anbg Renesas Electronics Corporation., r8a77850anbg Datasheet - Page 1093

• Manufacturer Part Number: r8a77850anbg
• Description: Renesas 32-bit Risc Microcomputer Superh? Risc Engine Family
• Manufacturer: Renesas Electronics Corporation.

Notes: 1. Only channel 0. Reserved bit in channels 1 to 5.
Bit
5
4
3
2
1
0
2. Figures in parentheses are the number of empty bytes in SCFTDR when the flag is set.
3. SCIF_CTS is fixed at active-0 regardless of the input value, and SCIF_RTS output is
4. A reset operation is performed in the event of a power-on reset or manual reset.
Bit Name
TTRG1
TTRG0
MCE*
TFCL
RFCL
LOOP
also fixed at 0.
1
Initial
Value
0
0
0
0
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Description
Transmit FIFO Data Count Trigger
These bits are used to set the number of remaining
transmit data bytes that sets the TDFE flag in SCFSR.
The TDFE flag is set when the number of transmit data
bytes in SCFTDR is equal to or less than the trigger
setting count shown below.
00: 32 (32)*
01:16 (48)
10: 2 (62)
11: 0 (64)
Modem Control Enable
Enables the SCIF_CTS and SCIF_RTS modem control
signals. Always set the MCE bit to 0 in clocked
synchronous mode.
0: Modem signals disabled*
1: Modem signals enabled
Transmit FIFO Data Count Register Clear
Clears the transmit data count in the transmit FIFO
data count register to 0.
0: The FIFO data count not cleared*
1: The FIFO data count cleared to 0
Receive FIFO Data Count Register Clear
Clears the receive data count in the receive FIFO data
count register to 0.
0: The FIFO data count not cleared*
1: The FIFO data count cleared
Loopback Test
Internally connects the transmit output pin (SCIF_TXD)
and receive input pin (SCIF_RXD), and the SCIF_RTS
pin and SCIF_CTS pin, enabling loopback testing.
0: Loopback test disabled
1: Loopback test enabled
21. Serial Communication Interface with FIFO (SCIF)
2
Rev.1.00 Jan. 10, 2008 Page 1063 of 1658
3
4
4
REJ09B0261-0100