DEMO9S12XEP100 Freescale Semiconductor, DEMO9S12XEP100 Datasheet - Page 136

• Manufacturer Part Number: DEMO9S12XEP100
• Description: BOARD DEMO FOR MC9S12XEP100
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of DEMO9S12XEP100

• Contents: Board, Cables, CD
• Processor To Be Evaluated: MC9S12XEP100
• Data Bus Width: 16 bit
• Interface Type: RS-232
• Silicon Manufacturer: Freescale
• Core Architecture: S12
• Core Sub-architecture: S12
• Silicon Core Number: MC9S12
• Silicon Family Name: S12XE
• Rohs Compliant: Yes
• For Use With/related Products: MC9S12XEP100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1. Read: Anytime.
1. Read: Anytime.
Chapter 2 Port Integration Module (S12XEPIMV1)
2.3.39
136
Address 0x0252
Write:Never, writes to this register have no effect.
Write: Anytime.
DDRM
DDRM
DDRM
Field
PTIM
Field
Reset
7-0
7
6
5
W
R
Port M input data—
This register always reads back the buffered state of the associated pins. This can also be used to detect overload
or short circuit conditions on output pins.
Port M data direction—
This register controls the data direction of pin 7.
The enabled CAN3, routed CAN4, or routed SCI3 forces the I/O state to be an output. In those cases the data
direction bits will not change. The DDRM bits revert to controlling the I/O direction of a pin when the associated
peripheral module is disabled.
1 Associated pin is configured as output.
0 Associated pin is configured as input.
Port M data direction—
This register controls the data direction of pin 6.
The enabled CAN3, routed CAN4, or routed SCI3 forces the I/O state to be an input. In those cases the data direction
bits will not change. The DDRM bits revert to controlling the I/O direction of a pin when the associated peripheral
module is disabled.
1 Associated pin is configured as output.
0 Associated pin is configured as input.
Port M data direction—
This register controls the data direction of pin 5.
The enabled CAN2, routed CAN0, or routed CAN4 forces the I/O state to be an output. Depending on the
configuration of the enabled routed SPI0 this pin will be forced to be input or output. In those cases the data direction
bits will not change. The DDRM bits revert to controlling the I/O direction of a pin when the associated peripheral
module is disabled.
1 Associated pin is configured as output.
0 Associated pin is configured as input.
DDRM7
Port M Data Direction Register (DDRM)
0
7
DDRM6
0
6
Figure 2-37. Port M Data Direction Register (DDRM)
Table 2-35. DDRM Register Field Descriptions
Table 2-34. PTIM Register Field Descriptions
MC9S12XE-Family Reference Manual , Rev. 1.23
DDRM5
0
5
DDRM4
0
4
Description
Description
DDRM3
3
0
DDRM2
0
2
Access: User read/write
Freescale Semiconductor
DDRM1
0
1
DDRM0
0
0
(1)