DEMO9S12XEP100 Freescale Semiconductor, DEMO9S12XEP100 Datasheet - Page 700

• Manufacturer Part Number: DEMO9S12XEP100
• Description: BOARD DEMO FOR MC9S12XEP100
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of DEMO9S12XEP100

• Contents: Board, Cables, CD
• Processor To Be Evaluated: MC9S12XEP100
• Data Bus Width: 16 bit
• Interface Type: RS-232
• Silicon Manufacturer: Freescale
• Core Architecture: S12
• Core Sub-architecture: S12
• Silicon Core Number: MC9S12
• Silicon Family Name: S12XE
• Rohs Compliant: Yes
• For Use With/related Products: MC9S12XEP100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 19 Pulse-Width Modulator (S12PWM8B8CV1)
19.3.2.2
The starting polarity of each PWM channel waveform is determined by the associated PPOLx bit in the
PWMPOL register. If the polarity bit is one, the PWM channel output is high at the beginning of the cycle
and then goes low when the duty count is reached. Conversely, if the polarity bit is zero, the output starts
low and then goes high when the duty count is reached.
Read: Anytime
Write: Anytime
700
Module Base + 0x0001
Because of an order from the United States International Trade Commission, BGA-packaged product lines and partnumbers
PPOL[7:0]
PWME2
PWME1
PWME0
Reset
indicated here currently are not available from Freescale for import or sale in the United States prior to September 2010
Field
Field
7–0
2
1
0
W
R
PPOL7
Pulse Width Channel 2 Enable
0 Pulse width channel 2 is disabled.
1 Pulse width channel 2 is enabled. The pulse modulated signal becomes available at PWM, output bit 2 when
Pulse Width Channel 1 Enable
0 Pulse width channel 1 is disabled.
1 Pulse width channel 1 is enabled. The pulse modulated signal becomes available at PWM, output bit 1 when
Pulse Width Channel 0 Enable
0 Pulse width channel 0 is disabled.
1 Pulse width channel 0 is enabled. The pulse modulated signal becomes available at PWM, output bit 0 when
Pulse Width Channel 7–0 Polarity Bits
0 PWM channel 7–0 outputs are low at the beginning of the period, then go high when the duty count is
1 PWM channel 7–0 outputs are high at the beginning of the period, then go low when the duty count is
PWM Polarity Register (PWMPOL)
0
7
PPOLx register bits can be written anytime. If the polarity is changed while
a PWM signal is being generated, a truncated or stretched pulse can occur
during the transition
its clock source begins its next cycle. If CON23 = 1, then bit has no effect and PWM output bit2 is disabled.
its clock source begins its next cycle. If CON01 = 1, then bit has no effect and PWM output line0 is disabled.
reached.
reached.
its clock source begins its next cycle.
PPOL6
0
6
Figure 19-4. PWM Polarity Register (PWMPOL)
MC9S12XE-Family Reference Manual , Rev. 1.23
PPOL5
5
0
PPOL4
NOTE
0
4
Description
Description
PPOL3
0
3
PPOL2
2
0
Freescale Semiconductor
PPOL1
0
1
PPOL0
0
0