DEMO9S12XEP100 Freescale Semiconductor, DEMO9S12XEP100 Datasheet - Page 280

• Manufacturer Part Number: DEMO9S12XEP100
• Description: BOARD DEMO FOR MC9S12XEP100
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of DEMO9S12XEP100

• Contents: Board, Cables, CD
• Processor To Be Evaluated: MC9S12XEP100
• Data Bus Width: 16 bit
• Interface Type: RS-232
• Silicon Manufacturer: Freescale
• Core Architecture: S12
• Core Sub-architecture: S12
• Silicon Core Number: MC9S12
• Silicon Family Name: S12XE
• Rohs Compliant: Yes
• For Use With/related Products: MC9S12XEP100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 6 Interrupt (S12XINTV2)
6.5.3
6.5.3.1
Every I bit maskable interrupt request which is configured to be handled by the CPU is capable of waking
the MCU from stop or wait mode. To determine whether an I bit maskable interrupts is qualified to wake
up the CPU or not, the same settings as in normal run mode are applied during stop or wait mode:
The X bit maskable interrupt request can wake up the MCU from stop or wait mode at anytime, even if the
X bit in CCR is set. If the X bit maskable interrupt request is used to wake-up the MCU with the X bit in
the CCR set, the associated ISR is not called. The CPU then resumes program execution with the
instruction following the WAI or STOP instruction. This features works following the same rules like any
interrupt request, i.e. care must be taken that the X interrupt request used for wake-up remains active at
least until the system begins execution of the instruction following the WAI or STOP instruction;
otherwise, wake-up may not occur.
6.5.3.2
Interrupt request channels which are configured to be handled by the XGATE module are capable of
waking up the XGATE module. Interrupt request channels handled by the XGATE module do not affect
the state of the CPU.
280
Because of an order from the United States International Trade Commission, BGA-packaged product lines and partnumbers
indicated here currently are not available from Freescale for import or sale in the United States prior to September 2010
•
•
•
Processing Levels
If the I bit in the CCR is set, all I bit maskable interrupts are masked from waking up the MCU.
An I bit maskable interrupt is ignored if it is configured to a priority level below or equal to the
current IPL in CCR.
I bit maskable interrupt requests which are configured to be handled by the XGATE module are not
capable of waking up the CPU.
Stacked IPL
IPL in CCR
Wake Up from Stop or Wait Mode
CPU Wake Up from Stop or Wait Mode
XGATE Wake Up from Stop or Wait Mode
7
6
5
4
3
2
1
0
Reset
0
MC9S12XE-Family Reference Manual , Rev. 1.23
Figure 6-14. Interrupt Processing Example
L4
0
4
L7
0
4
7
L1 (Pending)
L3 (Pending)
RTI
0
4
RTI
0
3
RTI
Freescale Semiconductor
0
1
RTI
0