DEMO9S12XEP100 Freescale Semiconductor, DEMO9S12XEP100 Datasheet - Page 272

• Manufacturer Part Number: DEMO9S12XEP100
• Description: BOARD DEMO FOR MC9S12XEP100
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of DEMO9S12XEP100

• Contents: Board, Cables, CD
• Processor To Be Evaluated: MC9S12XEP100
• Data Bus Width: 16 bit
• Interface Type: RS-232
• Silicon Manufacturer: Freescale
• Core Architecture: S12
• Core Sub-architecture: S12
• Silicon Core Number: MC9S12
• Silicon Family Name: S12XE
• Rohs Compliant: Yes
• For Use With/related Products: MC9S12XEP100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 6 Interrupt (S12XINTV2)
6.3.2.3
Read: Anytime
Write: Anytime
6.3.2.4
The eight register window visible at addresses INT_CFDATA0–7 contains the configuration data for the
block of eight interrupt requests (out of 128) selected by the interrupt configuration address register
(INT_CFADDR) in ascending order. INT_CFDATA0 represents the interrupt configuration data register
of the vector with the lowest address in this block, while INT_CFDATA7 represents the interrupt
configuration data register of the vector with the highest address, respectively.
272
Address: 0x0127
INT_CFADDR[7:4]
Because of an order from the United States International Trade Commission, BGA-packaged product lines and partnumbers
Reset
indicated here currently are not available from Freescale for import or sale in the United States prior to September 2010
W
Field
R
7–4
Interrupt Request Configuration Address Register (INT_CFADDR)
Interrupt Request Configuration Data Registers (INT_CFDATA0–7)
0
7
Priority
Interrupt Request Configuration Data Register Select Bits — These bits determine which of the 128
configuration data registers are accessible in the 8 register window at INT_CFDATA0–7. The hexadecimal
value written to this register corresponds to the upper nibble of the lower byte of the address of the interrupt
vector, i.e., writing 0xE0 to this register selects the configuration data register block for the 8 interrupt vector
requests starting with vector at address (vector base + 0x00E0) to be accessible as INT_CFDATA0–7.
Note: Writing all 0s selects non-existing configuration registers. In this case write accesses to
high
low
Figure 6-5. Interrupt Configuration Address Register (INT_CFADDR)
= Unimplemented or Reserved
INT_CFDATA0–7 will be ignored and read accesses will return all 0.
INT_CFADDR[7:4]
0
6
XILVL2
0
0
0
0
1
1
1
1
MC9S12XE-Family Reference Manual , Rev. 1.23
Table 6-7. INT_CFADDR Field Descriptions
Table 6-6. XGATE Interrupt Priority Levels
XILVL1
5
0
0
0
1
1
0
0
1
1
XILVL0
1
4
0
1
0
1
0
1
0
1
Description
Interrupt request is disabled
0
0
3
Priority level 1
Priority level 2
Priority level 3
Priority level 4
Priority level 5
Priority level 6
Priority level 7
Meaning
2
0
0
Freescale Semiconductor
0
0
1
0
0
0