MPC8533EVTAQGA Freescale Semiconductor, MPC8533EVTAQGA Datasheet - Page 280

• Manufacturer Part Number: MPC8533EVTAQGA
• Description: MPU POWERQUICC 783-PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MPC8533EVTAQGA

• Processor Type: MPC85xx PowerQUICC III 32-Bit
• Speed: 1.0GHz
• Voltage: 0.95 V ~ 1.05 V
• Mounting Type: Surface Mount
• Package / Case: 783-BBGA, FCBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -

L2 Look-Aside Cache/SRAM
7-12
22–23
24–27
Bits
18
19
20
21
28
L2STASHDIS
L2LFRID
L2SLC
L2LFR
Name
L2LO
—
—
MPC8533E PowerQUICC III Integrated Host Processor Family Reference Manual, Rev. 1
L2 cache lock overflow. Reserved in full memory-mapped SRAM mode. This sticky bit is set if an
overlock condition is detected in the L2 cache. A lock overflow is triggered either by executing
instruction or data cache block touch and lock set instructions or by performing L2 cache external
writes with lock set. If all ways are locked and an attempt to stash is made, the stash is not allocated.
0 The L2 cache did not encounter a lock overflow. L2LO is cleared only by software.
1 The L2 cache encountered a lock overflow condition.
L2 snoop lock clear. This sticky bit is set if a snoop invalidated a locked data cache line. Note that the
lock bit for that line is cleared whenever the line is invalidated. L2SLC is reserved in full
memory-mapped SRAM mode.
0 A snoop did not invalidate a locked L2 cache line. L2SLC is cleared only by software.
1 The L2 cache encountered a snoop that invalidated a locked line.
Reserved
L2 cache lock bits flash reset. The L2 cache must be enabled (L2CTL[L2E] = 1) for reset to occur. This
field is reserved in full memory-mapped SRAM mode.
0 The L2 cache lock bits are not cleared or the clear operation completed.
1 A reset operation is issued that clears each L2 cache line’s lock bits. Depending on the L2LFRID
L2 cache lock bits flash reset select instruction or data. Indicates whether data or instruction lock bits
or both are reset.
00 Not used
01 Reset data locks if L2LFR = 1.
10 Reset instruction locks if L2LFR = 1.
11 Reset both data and instruction locks if L2LFR = 1.
Reserved
L2 stash allocate disable. Disables allocation of lines for stashing.
0 The L2 cache will allocate lines for global writes that hit in a stash range or that have the stashing
1 The L2 will not allocate lines for stashed writes.
Note: This bit does NOT affect the updating of lines that are already resident in the cache and have
value, data or instruction locks, or both, can be reset. Cache access is blocked during this time. After
L2LFR is set, the L2 cache unit automatically clears L2LFR when the reset operation is complete
(if L2CTL[L2E] is set).
attribute set.
the stash attribute set or hit a stash range. Such lines will be updated even if this bit is set.To
change this bit, the L2 must be disabled (L2CTL[L2E] = 0).
Table 7-4. L2CTL Field Descriptions (continued)
Description
Freescale Semiconductor