HD64F38024DV Renesas Electronics America, HD64F38024DV Datasheet - Page 159

• Manufacturer Part Number: HD64F38024DV
• Description: IC H8/SLP MCU FLASH 80QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300L SLPr

Specifications of HD64F38024DV

• Core Processor: H8/300L
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: SCI
• Peripherals: LCD, PWM, WDT
• Number Of I /o: 51
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

5.6
5.6.1
Subactive mode is entered from watch mode if a timer A, timer F, timer G, IRQ
WKP
subactive mode is entered if a timer A, timer C, timer F, timer G, asynchronous event counter,
SCI3, IRQAEC, IRQ
to subactive mode does not take place if the I bit of CCR is set to 1 or the particular interrupt is
disabled in the interrupt enable register.
5.6.2
Subactive mode is cleared by a SLEEP instruction or by a low input at the RES pin.
• Clearing by SLEEP instruction
• Clearing by RES pin
5.6.3
The operating frequency in subactive mode is set in bits SA1 and SA0 in SYSCR2. The choices
are φ
If a SLEEP instruction is executed while the SSBY bit in SYSCR1 is set to 1 and TMA3 bit in
TMA is set to 1, subactive mode is cleared and watch mode is entered. If a SLEEP instruction
is executed while SSBY = 0 and LSON = 1 in SYSCR1 and TMA3 = 1 in TMA, subsleep
mode is entered. Direct transfer to active mode is also possible; see section 5.8, Direct
Transfer, below.
Clearing by RES pin is the same as for standby mode; see Clearing by RES pin in section
5.3.2, Clearing Standby Mode.
W
0
/2, φ
interrupt is requested while the LSON bit in SYSCR1 is set to 1. From subsleep mode,
Transition to Subactive Mode
Clearing Subactive Mode
Operating Frequency in Subactive Mode
Subactive Mode
W
/4, and φ
4
W
, IRQ
/8.
3
, IRQ
1
, IRQ
0
, or WKP
7
to WKP
Rev. 8.00 Mar. 09, 2010 Page 137 of 658
0
interrupt is requested. A transition
Section 5 Power-Down Modes
0
REJ09B0042-0800
, or WKP
7
to