DF2166VT33WV Renesas Electronics America, DF2166VT33WV Datasheet - Page 113

• Manufacturer Part Number: DF2166VT33WV
• Description: MCU 16BIT FLASH 3V 512K 144-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2166VT33WV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

5.1
• Two interrupt control modes
• Priorities settable with ICR
• Three-level interrupt mask control
• Independent vector addresses
• Forty-one external interrupts
• DTC control
Any of two interrupt control modes can be set by means of the INTM1 and INTM0 bits in the
system control register (SYSCR).
An interrupt control register (ICR) is provided for setting interrupt priorities. Priority levels
can be set for each module for all interrupts except NMI, KIN, and WUE.
By means of the interrupt control mode, I and UI bits in CCR, and ICR, 3-level interrupt mask
control is performed.
All interrupt sources are assigned independent vector addresses, making it unnecessary for the
source to be identified in the interrupt handling routine.
NMI is the highest-priority interrupt, and is accepted at all times. Rising edge or falling edge
detection can be selected for NMI. Falling-edge, rising-edge, or both-edge detection, or level
sensing, can be selected for IRQ15 to IRQ0. An interrupt is requested at the falling edge for
KIN15 to KIN0 and WUE15 to WUE8.
The DTC can be activated by an interrupt request.
Features
Section 5 Interrupt Controller
Rev. 3.00, 03/04, page 71 of 830