DF2166VT33WV Renesas Electronics America, DF2166VT33WV Datasheet - Page 68

• Manufacturer Part Number: DF2166VT33WV
• Description: MCU 16BIT FLASH 3V 512K 144-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2166VT33WV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

2.4.4
This 8-bit register contains internal CPU status information, including an interrupt mask bit (I) and
half-carry (H), negative (N), zero (Z), overflow (V), and carry (C) flags.
Operations can be performed on the CCR bits by the LDC, STC, ANDC, ORC, and XORC
instructions. The N, Z, V, and C flags are used as branching conditions for conditional branch
(Bcc) instructions.
Rev. 3.00, 03/04, page 26 of 830
Bit
7
6
5
4
3
2
1
Bit Name
I
UI
H
U
N
Z
V
Condition-Code Register (CCR)
Initial Value
1
Undefined
Undefined
Undefined
Undefined
Undefined
Undefined
R/W Description
R/W Interrupt Mask Bit
R/W User Bit or Interrupt Mask Bit
R/W Half-Carry Flag
R/W User Bit
R/W Negative Flag
R/W Zero Flag
R/W Overflow Flag
Masks interrupts other than NMI when set to 1. NMI is
accepted regardless of the I bit setting. The I bit is set to 1
at the start of an exception-handling sequence. For details,
see section 5, Interrupt Controller.
Can be written to and read from by software using the
LDC, STC, ANDC, ORC, and XORC instructions.
When the ADD.B, ADDX.B, SUB.B, SUBX.B, CMP.B or
NEG.B instruction is executed, this flag is set to 1 if there is
a carry or borrow at bit 3, and cleared to 0 otherwise. When
the ADD.W, SUB.W, CMP.W, or NEG.W instruction is
executed, the H flag is set to 1 if there is a carry or borrow
at bit 11, and cleared to 0 otherwise. When the ADD.L,
SUB.L, CMP.L, or NEG.L instruction is executed, the H flag
is set to 1 if there is a carry or borrow at bit 27, and cleared
to 0 otherwise.
Can be written to and read from by software using the
LDC, STC, ANDC, ORC, and XORC instructions.
Stores the value of the most significant bit of data as a sign
bit.
Set to 1 to indicate zero data, and cleared to 0 to indicate
non-zero data.
Set to 1 when an arithmetic overflow occurs, and cleared to
0 otherwise.