DF2166VT33WV Renesas Electronics America, DF2166VT33WV Datasheet - Page 83

• Manufacturer Part Number: DF2166VT33WV
• Description: MCU 16BIT FLASH 3V 512K 144-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2166VT33WV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Table 2.10 Block Data Transfer Instructions
Instruction
EEPMOV.B
EEPMOV.W
2.6.2
The H8S/2000 CPU instructions consist of 2-byte (1-word) units. An instruction consists of an
operation field (op), a register field (r), an effective address extension (EA), and a condition field
(cc).
Figure 2.11 shows examples of instruction formats.
• Operation field
• Register field
• Effective address extension
• Condition field
Indicates the function of the instruction, the addressing mode, and the operation to be carried
out on the operand. The operation field always includes the first four bits of the instruction.
Some instructions have two operation fields.
Specifies a general register. Address registers are specified by 3-bit, and data registers by 3-bit
or 4-bit. Some instructions have two register fields, and some have no register field.
8-, 16-, or 32-bit specifying immediate data, an absolute address, or a displacement.
Specifies the branching condition of Bcc instructions.
Basic Instruction Formats
Size
–
–
Function
if R4L ≠ 0 then
else next:
if R4 ≠ 0 then
else next:
Transfers a data block. Starting from the address set in ER5, transfers
data for the number of bytes set in R4L or R4 to the address location
set in ER6.
Execution of the next instruction begins as soon as the transfer is
completed.
Repeat @ER5+ → @ER6+
Until R4L = 0
Repeat @ER5+ → @ER6+
Until R4 = 0
R4L–1 → R4L
R4–1 → R4
Rev. 3.00, 03/04, page 41 of 830