DF2166VT33WV Renesas Electronics America, DF2166VT33WV Datasheet - Page 625

• Manufacturer Part Number: DF2166VT33WV
• Description: MCU 16BIT FLASH 3V 512K 144-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2166VT33WV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

clock must first be issued to the host. For details see section 16.4.8, LPC Interface Clock Start
Request.
16.4.8
A request to restart the clock (LCLK) can be sent to the host processor by means of the CLKRUN
pin. With LPC data transfer and SERIRQ in continuous mode, a clock restart is never requested
since the transfer cycles are initiated by the host. With SERIRQ in quiet mode, when a host
interrupt request is generated the CLKRUN signal is driven and a clock (LCLK) restart request is
sent to the host. The timing for this operation is shown in figure 16.11.
Cases other than SERIRQ in quiet mode when clock restart is required must be handled with a
different protocol, using the PME signal, etc.
CLK
CLKRUN
LPC Interface Clock Start Request
Pull-up enable
Drive by the slave processor
Figure 16.11 Clock Start or Speed-Up
1
2
Drive by the host processor
3
Rev. 3.00, 03/04, page 583 of 830
4
5
6