DF2166VT33WV Renesas Electronics America, DF2166VT33WV Datasheet - Page 365

• Manufacturer Part Number: DF2166VT33WV
• Description: MCU 16BIT FLASH 3V 512K 144-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2166VT33WV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

12.5
12.5.1
Figure 12.4 shows the TCNT count timing with an internal clock source. Figure 12.5 shows the
TCNT count timing with an external clock source. The pulse width of the external clock signal
must be at least 1.5 system clocks (φ) for a single edge and at least 2.5 system clocks (φ) for both
edges. The counter will not increment correctly if the pulse width is less than these values.
12.5.2
The CMFA and CMFB flags in TCSR are set to 1 by a compare-match signal generated when the
TCNT and TCOR values match. The compare-match signal is generated at the last state in which
the match is true, just when the timer counter is updated. Therefore, when TCNT and TCOR
match, the compare-match signal is not generated until the next TCNT input clock. Figure 12.6
shows the timing of CMF flag setting.
φ
Internal clock
TCNT input
clock
TCNT
φ
External clock
input pin
TCNT input
clock
TCNT
Operation Timing
TCNT Count Timing
Timing of CMFA and CMFB Setting at Compare-Match
Figure 12.5 Count Timing for External Clock Input
Figure 12.4 Count Timing for Internal Clock Input
N – 1
N – 1
N
N
Rev. 3.00, 03/04, page 323 of 830
N + 1
N + 1