DF2166VT33WV Renesas Electronics America, DF2166VT33WV Datasheet - Page 785

• Manufacturer Part Number: DF2166VT33WV
• Description: MCU 16BIT FLASH 3V 512K 144-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2166VT33WV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

23.6
The CPU makes a transition to hardware standby mode from any mode when the STBY pin is
driven low.
In hardware standby mode, all functions enter the reset state. As long as the prescribed voltage is
supplied, on-chip RAM data is retained. The I/O ports are set to the high-impedance state.
In order to retain on-chip RAM data, the RAME bit in SYSCR should be cleared to 0 before
driving the STBY pin low. Do not change the state of the mode pins (MD2, MD1, and MD0)
while this LSI is in hardware standby mode.
Hardware standby mode is cleared by the STBY pin input or the RES pin input.
When the STBY pin is driven high while the RES pin is low, clock oscillation is started. Ensure
that the RES pin is held low until system clock oscillation settles. When the RES pin is
subsequently driven high after the clock oscillation settling time has passed, reset exception
handling starts.
Figure 23.4 shows an example of hardware standby mode timing.
Oscillator
RES
STBY
Hardware Standby Mode
Figure 23.4 Hardware Standby Mode Timing
Rev. 3.00, 03/04, page 743 of 830
Oscillation
stabilization
time
exception
handling
Reset