ATMEGA128RFA1-ZU Atmel, ATMEGA128RFA1-ZU Datasheet - Page 21

• Manufacturer Part Number: ATMEGA128RFA1-ZU
• Description: IC AVR MCU 2.4GHZ XCEIVER 64QFN
• Manufacturer: Atmel
• Series: ATMEGAr

Specifications of ATMEGA128RFA1-ZU

• Frequency: 2.4GHz
• Data Rate - Maximum: 2Mbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 3.5dBm
• Sensitivity: -100dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Current - Receiving: 12.5mA
• Current - Transmitting: 14.5mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 4kB EEPROM, 16kB RAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN, Exposed Pad
• Rf Ic Case Style: QFN
• No. Of Pins: 64
• Supply Voltage Range: 1.8V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Processor Series: ATMEGA128x
• Core: AVR8
• Data Bus Width: 8 bit
• Program Memory Type: Flash
• Program Memory Size: 128 KB
• Data Ram Size: 16 KB
• Interface Type: JTAG
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 38
• Number Of Timers: 6
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVR128RFA1-EK1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8266B-MCU Wireless-03/11
The following code examples show assembly and C functions for programming the
EEPROM with separate and combined (atomic) erase/write operations respectively.
The examples assume that interrupts are controlled (e.g. by disabling interrupts
globally) so that no interrupts will occur during execution of these functions. The
examples also assume that no Flash Boot Loader is present in the software. If such
code is present, the EEPROM write function must also wait for any ongoing SPM
command to finish.
Assembly Code Example
EEPROM_write:
EEPROM_erase:
; main program
…
ldi r17, addr_low
ldi r18, addr_high
call EEPROM_erase
ldi r16, ee_data
; Wait for completion of previous erase/write
sbic EECR,EEPE
rjmp EEPROM_write
; Set up address (r18:r17) in address register
out EEARH, r18
out EEARL, r17
; Write data (r16) to Data Register
out EEDR,r16
; Write is controlled with r20 and r21
ldi r20, (1<<EEMPE) + (2<<EEPM0)
ldi r21, (1<<EEMPE) + (1<<EEPE) + (2<<EEPM0)
; Start eeprom write
out EECR, r20
out EECR, r21
ret
; Wait for completion of previous erase/write
sbic EECR,EEPE
rjmp EEPROM_erase
; Set up address (r18:r17) in address register
out EEARH, r18
out EEARL, r17
; Set EEDR to 0xff
ser r16
out EEDR,r16
; Erase is controlled with r20 and r21
ldi r20, (1<<EEMPE) + (1<<EEPM0)
ldi r21, (1<<EEMPE) + (1<<EEPE) + (1<<EEPM0)
; Start eeprom erase
out EECR, r20
out EECR, r21
ret
ATmega128RFA1
21