ATMEGA128RFA1-ZU Atmel, ATMEGA128RFA1-ZU Datasheet - Page 329

• Manufacturer Part Number: ATMEGA128RFA1-ZU
• Description: IC AVR MCU 2.4GHZ XCEIVER 64QFN
• Manufacturer: Atmel
• Series: ATMEGAr

Specifications of ATMEGA128RFA1-ZU

• Frequency: 2.4GHz
• Data Rate - Maximum: 2Mbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 3.5dBm
• Sensitivity: -100dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Current - Receiving: 12.5mA
• Current - Transmitting: 14.5mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 4kB EEPROM, 16kB RAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN, Exposed Pad
• Rf Ic Case Style: QFN
• No. Of Pins: 64
• Supply Voltage Range: 1.8V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Processor Series: ATMEGA128x
• Core: AVR8
• Data Bus Width: 8 bit
• Program Memory Type: Flash
• Program Memory Size: 128 KB
• Data Ram Size: 16 KB
• Interface Type: JTAG
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 38
• Number Of Timers: 6
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVR128RFA1-EK1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

21.11.8 ASSR – Asynchronous Status Register
8266B-MCU Wireless-03/11
The Output Compare Register B contains an 8-bit value that is continuously compared
with the counter value (TCNT2). A match can be used to generate an Output Compare
interrupt, or to generate a waveform output on the OC2B pin.
• Bit 7:0 – OCR2B7:0 - Output Compare Register
The register ASSR controls the asynchronous clocks for Timer/Counter2 and enables
the
(AS2,EXCLK,EXCLKAMR) are used to control the clocks. Note, to prevent clock spikes
on asynchronous clock wires, every access to ASSR should change only one of the
three bits.
• Bit 7 – EXCLKAMR - Enable External Clock Input for AMR
The bit EXCLKAMR extends the available clock sources for Timer/Counter2. If this bit is
written to one, and asynchronous clock is selected (bit AS2 set), AMR functionality is
enabled and Timer/Counter2 is clocked by pin AMR.
• Bit 6 – EXCLK - Enable External Clock Input
When EXCLK is written to one, and asynchronous clock is selected, the external clock
input buffer is enabled and an external clock can be input on Timer Oscillator 1
(TOSC1) pin instead of a 32 kHz crystal. Writing to EXCLK should be done before
asynchronous operation is selected. Note that the crystal Oscillator will only run when
this bit is zero.
• Bit 5 – AS2 - Timer/Counter2 Asynchronous Mode
When AS2 is written to zero, Timer/Counter2 is clocked from the I/O clock, clkI/O.
When AS2 is written to one, Timer/Counter2 is clocked from a crystal Oscillator
connected to the Timer Oscillator 1 (TOSC1) pin. When the value of AS2 is changed,
the contents of TCNT2, OCR2A, OCR2B, TCCR2A and TCCR2B might be corrupted.
• Bit 4 – TCN2UB - Timer/Counter2 Update Busy
When Timer/Counter2 operates asynchronously and TCNT2 is written, this bit becomes
set. When TCNT2 has been updated from the temporary storage register, this bit is
cleared by hardware. A logical zero in this bit indicates that TCNT2 is ready to be
updated with a new value.
• Bit 3 – OCR2AUB - Timer/Counter2 Output Compare Register A Update Busy
When Timer/Counter2 operates asynchronously and OCR2A is written, this bit
becomes set. When OCR2A has been updated from the temporary storage register,
this bit is cleared by hardware. A logical zero in this bit indicates that OCR2A is ready to
be updated with a new value.
• Bit 2 – OCR2BUB - Timer/Counter2 Output Compare Register B Update Busy
When Timer/Counter2 operates asynchronously and OCR2B is written, this bit
becomes set. When OCR2B has been updated from the temporary storage register,
Bit
NA ($B6)
Read/Write
Initial
asynchronous
EXCLKAMR EXCLK AS2 TCN2UB OCR2AUB OCR2BUB TCR2AUB TCR2BUB ASSR
RW
7
0
32kHz
RW
6
0
RW
5
0
clock
R
4
0
for
R
3
0
the
ATmega128RFA1
symbol
R
2
0
counter.
R
1
0
R
Three
0
0
bits
329