ATMEGA128RFA1-ZU Atmel, ATMEGA128RFA1-ZU Datasheet - Page 270

• Manufacturer Part Number: ATMEGA128RFA1-ZU
• Description: IC AVR MCU 2.4GHZ XCEIVER 64QFN
• Manufacturer: Atmel
• Series: ATMEGAr

Specifications of ATMEGA128RFA1-ZU

• Frequency: 2.4GHz
• Data Rate - Maximum: 2Mbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 3.5dBm
• Sensitivity: -100dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Current - Receiving: 12.5mA
• Current - Transmitting: 14.5mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 4kB EEPROM, 16kB RAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN, Exposed Pad
• Rf Ic Case Style: QFN
• No. Of Pins: 64
• Supply Voltage Range: 1.8V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Processor Series: ATMEGA128x
• Core: AVR8
• Data Bus Width: 8 bit
• Program Memory Type: Flash
• Program Memory Size: 128 KB
• Data Ram Size: 16 KB
• Interface Type: JTAG
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 38
• Number Of Timers: 6
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVR128RFA1-EK1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

18.11.3 TCCR1C – Timer/Counter1 Control Register C
18.11.4 TCNT1H – Timer/Counter1 High Byte
270
ATmega128RFA1
• Bit 7 – FOC1A - Force Output Compare for Channel A
The FOC1A bit is only active when the WGM13:0 bits specify a non-PWM mode. When
writing a logical one to the FOC1A bit, an immediate compare match is forced on the
waveform generation unit. The OC1A output is changed according to its COM1A1:0 bits
setting. Note that the FOC1A bits are implemented as strobes. Therefore it is the value
present in the COM1A1:0 bits that determine the effect of the forced compare. A
FOC1A strobe will not generate any interrupt nor will it clear the timer in Clear Timer on
Compare Match (CTC) mode using OCR1A as TOP. The FOC1A bits are always read
as zero.
• Bit 6 – FOC1B - Force Output Compare for Channel B
The FOC1B bit is only active when the WGM13:0 bits specify a non-PWM mode. When
writing a logical one to the FOC1B bit, an immediate compare match is forced on the
waveform generation unit. The OC1B output is changed according to its COM1B1:0 bits
setting. Note that the FOC1B bits are implemented as strobes. Therefore it is the value
present in the COM1B1:0 bits that determine the effect of the forced compare. A
FOC1B strobe will not generate any interrupt nor will it clear the timer in Clear Timer on
Compare Match (CTC) mode using OCR1B as TOP. The FOC1B bits are always read
as zero.
• Bit 5 – FOC1C - Force Output Compare for Channel C
The FOC1C bit is only active when the WGM13:0 bits specify a non-PWM mode. When
writing a logical one to the FOC1C bit, an immediate compare match is forced on the
waveform generation unit. The OC1C output is changed according to its COM1C1:0 bits
setting. Note that the FOC1C bits are implemented as strobes. Therefore it is the value
present in the COM1C1:0 bits that determine the effect of the forced compare. A
FOC1C strobe will not generate any interrupt nor will it clear the timer in Clear Timer on
Compare Match (CTC) mode using OCR1C as TOP. The FOC1C bits are always read
as zero.
• Bit 4:0 – Res4:0 - Reserved
These bits are reserved for future use.
The two Timer/Counter I/O locations (TCNT1H and TCNT1L, combined TCNT1) give
direct access, both for read and for write operations, to the Timer/Counter unit 16-bit
counter. To ensure that both the high and low bytes are read and written simultaneously
when the CPU accesses these registers, the access is performed using an 8-bit
temporary High Byte Register (TEMP). This temporary register is shared by all the other
Bit
NA ($82)
Read/Write
Initial Value
Bit
NA ($85)
Read/Write
Initial Value
FOC1A
RW
RW
7
0
7
0
RW
FOC1B
6
0
RW
6
0
RW
5
0
FOC1C
RW
5
0
RW
TCNT1H7:0
4
0
Res4
R
4
0
RW
3
0
Res3
R
3
0
RW
2
0
Res2
R
2
0
RW
1
0
Res1
RW
R
1
0
0
0
8266A-MCU Wireless-12/09
Res0
R
0
0
TCNT1H
TCCR1C