ATMEGA128RFA1-ZU Atmel, ATMEGA128RFA1-ZU Datasheet - Page 362

• Manufacturer Part Number: ATMEGA128RFA1-ZU
• Description: IC AVR MCU 2.4GHZ XCEIVER 64QFN
• Manufacturer: Atmel
• Series: ATMEGAr

Specifications of ATMEGA128RFA1-ZU

• Frequency: 2.4GHz
• Data Rate - Maximum: 2Mbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 3.5dBm
• Sensitivity: -100dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Current - Receiving: 12.5mA
• Current - Transmitting: 14.5mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 4kB EEPROM, 16kB RAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN, Exposed Pad
• Rf Ic Case Style: QFN
• No. Of Pins: 64
• Supply Voltage Range: 1.8V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Processor Series: ATMEGA128x
• Core: AVR8
• Data Bus Width: 8 bit
• Program Memory Type: Flash
• Program Memory Size: 128 KB
• Data Ram Size: 16 KB
• Interface Type: JTAG
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 38
• Number Of Timers: 6
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVR128RFA1-EK1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

23.10.9 UCSR1B – USART1 Control and Status Register B
362
ATmega128RFA1
This bit is set if the next character in the receive buffer had a Parity Error when received
and the Parity Checking was enabled at that point (UPM11 = 1). This bit is valid until the
receive buffer (UDR1) is read. Always set this bit to zero when writing to UCSR1A.
• Bit 1 – U2X1 - Double the USART Transmission Speed
This bit only has effect for the asynchronous operation. Write this bit to zero when using
synchronous operation. Writing this bit to one will reduce the divisor of the baud rate
divider from 16 to 8 effectively doubling the transfer rate for asynchronous
communication.
• Bit 0 – MPCM1 - Multi-processor Communication Mode
This bit enables the Multi-processor Communication mode. When the MPCM1 bit is
written to one, all the incoming frames received by the USART Receiver that do not
contain address information will be ignored. The Transmitter is unaffected by the
MPCM1 setting. For more detailed information see section "Multi-processor
Communication Mode".
• Bit 7 – RXCIE1 - RX Complete Interrupt Enable
Writing this bit to one enables interrupt on the RXC1 Flag. A USART Receive Complete
interrupt will be generated only if the RXCIE1 bit is written to one, the Global Interrupt
Flag in SREG is written to one and the RXC1 bit in UCSR1A is set.
• Bit 6 – TXCIE1 - TX Complete Interrupt Enable
Writing this bit to one enables interrupt on the TXC1 Flag. A USART Transmit Complete
interrupt will be generated only if the TXCIE1 bit is written to one, the Global Interrupt
Flag in SREG is written to one and the TXC1 bit in UCSR1A is set.
• Bit 5 – UDRIE1 - USART Data Register Empty Interrupt Enable
Writing this bit to one enables interrupt on the UDRE1 Flag. A Data Register Empty
interrupt will be generated only if the UDRIE1 bit is written to one, the Global Interrupt
Flag in SREG is written to one and the UDRE1 bit in UCSR1A is set.
• Bit 4 – RXEN1 - Receiver Enable
Writing this bit to one enables the USART Receiver. The Receiver will override normal
port operation for the RxD1 pin when enabled. Disabling the Receiver will flush the
receive buffer invalidating the FE1, DOR1 and UPE1 Flags.
• Bit 3 – TXEN1 - Transmitter Enable
Writing this bit to one enables the USART Transmitter. The Transmitter will override
normal port operation for the TxD1 pin when enabled. The disabling of the Transmitter
(writing TXEN1 to zero) will not become effective until ongoing and pending
transmissions are completed, i.e., when the Transmit Shift Register and Transmit Buffer
Register do not contain data to be transmitted. When disabled, the Transmitter will no
longer override the TxD1 port.
• Bit 2 – UCSZ12 - Character Size
Bit
NA ($C9)
Read/Write
Initial Value
RXCIE1
RW
7
0
TXCIE1
RW
6
0
UDRIE1
RW
5
1
RXEN1
RW
4
0
TXEN1
RW
3
0
UCSZ12
RW
2
0
RXB81
R
1
0
8266A-MCU Wireless-12/09
TXB81
W
0
0
UCSR1B