SAM3X8E Atmel Corporation, SAM3X8E Datasheet - Page 1057

• Manufacturer Part Number: SAM3X8E
• Manufacturer: Atmel Corporation

• CPOL: Channel Polarity
0 = The OCx output waveform (output from the comparator) starts at a low level.
1 = The OCx output waveform (output from the comparator) starts at a high level.
• CES: Counter Event Selection
The bit CES defines when the channel counter event occurs when the period is center aligned (flag CHIDx in the
Interrupt Status Register 1” on page
0/1 = The channel counter event occurs at the end of the PWM period.
0 = The channel counter event occurs at the end of the PWM period.
1 = The channel counter event occurs at the end of the PWM period and at half the PWM period.
• DTE: Dead-Time Generator Enable
0 = The dead-time generator is disabled.
1 = The dead-time generator is enabled.
• DTHI: Dead-Time PWMHx Output Inverted
0 = The dead-time PWMHx output is not inverted.
1 = The dead-time PWMHx output is inverted.
• DTLI: Dead-Time PWMLx Output Inverted
0 = The dead-time PWMLx output is not inverted.
1 = The dead-time PWMLx output is inverted.
11057A–ATARM–17-Feb-12
11057A–ATARM–17-Feb-12
CALG = 0 (Left Alignment):
CALG = 1 (Center Alignment):
1025).
SAM3X/A
SAM3X/A
“PWM
1057
1057