SAM3X8E Atmel Corporation, SAM3X8E Datasheet - Page 849

• Manufacturer Part Number: SAM3X8E
• Manufacturer: Atmel Corporation

0: No LIN Identifier has been sent since the last RSTSTA.
1: At least one LIN Identifier has been sent since the last RSTSTA.
0: No LIN Identifier has been received since the last RSTSTA.
1: At least one LIN Identifier has been received since the last RSTSTA
• LINTC: LIN Transfer Completed
0: The USART is idle or a LIN transfer is ongoing.
1: A LIN transfer has been completed since the last RSTSTA.
• CTSIC: Clear to Send Input Change Flag
0: No input change has been detected on the CTS pin since the last read of US_CSR.
1: At least one input change has been detected on the CTS pin since the last read of US_CSR.
• CTS: Image of CTS Input
0: CTS is set to 0.
1: CTS is set to 1.
• LINBLS: LIN Bus Line Status
0: LIN Bus Line is set to 0.
1: LIN Bus Line is set to 1.
• MANERR: Manchester Error
0: No Manchester error has been detected since the last RSTSTA.
1: At least one Manchester error has been detected since the last RSTSTA.
• LINBE: LIN Bit Error
0: No Bit Error has been detected since the last RSTSTA.
1: A Bit Error has been detected since the last RSTSTA.
• LINISFE: LIN Inconsistent Synch Field Error
0: No LIN Inconsistent Synch Field Error has been detected since the last RSTSTA
1: The USART is configured as a Slave node and a LIN Inconsistent Synch Field Error has been detected since the last
RSTSTA.
• LINIPE: LIN Identifier Parity Error
0: No LIN Identifier Parity Error has been detected since the last RSTSTA.
1: A LIN Identifier Parity Error has been detected since the last RSTSTA.
• LINCE: LIN Checksum Error
0: No LIN Checksum Error has been detected since the last RSTSTA.
1: A LIN Checksum Error has been detected since the last RSTSTA.
11057A–ATARM–17-Feb-12
11057A–ATARM–17-Feb-12
– If USART operates in LIN Slave Mode (USART_MODE = 0xB):
– Applicable if USART operates in LIN Mode (USART_MODE = 0xA or USART_MODE = 0xB):
SAM3X/A
SAM3X/A
849
849