AT32UC3L032-D3UR Atmel, AT32UC3L032-D3UR Datasheet - Page 184

• Manufacturer Part Number: AT32UC3L032-D3UR
• Description: MCU AVR32 32KB FLASH 48TLLGA
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3L032-D3UR

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TLLGA
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: SPI, TWI, USART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 7
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: AT32UC3L-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 9 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

13. System Control Interface (SCIF)
13.1
13.2
13.3
13.4
13.4.1
32099F–11/2010
Features
Overview
I/O Lines Description
Product Dependencies
I/O Lines
Rev: 1.0.2.2
•
•
•
•
•
•
•
•
•
•
•
•
•
The System Control Interface (SCIF) controls the oscillators, Generic Clocks, BODs, VREG,
Temperature Sensor, and Backup Registers.
Table 13-1.
In order to use this module, other parts of the system must be configured correctly, as described
below.
The SCIF provides a number of generic clock outputs, which can be connected to output pins,
multiplexed with GPIO lines. The programmer must first program the GPIO controller to assign
these pins to their peripheral function. If the I/O pins of the SCIF are not used by the application,
they can be used for other purposes by the GPIO controller. Oscillator pins are also multiplexed
Pin Name
RC32OUT
XIN0
XIN32
XIN32_2
XOUT0
XOUT32
XOUT32_2
GCLK4-GCLK0
Supports crystal oscillator 0.45-16MHz (OSC0)
Supports Digital Frequency Locked Loop 40-150MHz (DFLL)
Supports 32KHz ultra-low-power oscillator (OSC32K)
Supports 32kHz RC oscillator (RC32K)
Integrated low-power RC oscillator (RCSYS)
Generic clocks (GCLK) with wide frequency range provided
Controls bandgap voltage reference through control and calibration registers
Controls Brown-out detectors (BOD) and supply monitors
Controls Voltage Regulator (VREG) behavior and calibration
Controls Temperature Sensor
Controls Supply Monitor 33 (SM33) operating modes and calibration
Controls 120MHz integrated RC Oscillator (RC120M)
Four 32-bit general-purpose backup registers
I/O Lines Description
Pin Description
RC32 output at start-up
Crystal 0 input
Crystal 32 input (primary location)
Crystal 32 input (secondary location)
Crystal 0 output
Crystal 32 output (primary location)
Crystal 32 output (secondary location)
Generic clock output
AT32UC3L016/32/64
Type
Output
Analog/Digital
Analog/Digital
Analog/Digital
Analog
Analog
Analog
Output
184