AT32UC3L032-D3UR Atmel, AT32UC3L032-D3UR Datasheet - Page 381

• Manufacturer Part Number: AT32UC3L032-D3UR
• Description: MCU AVR32 32KB FLASH 48TLLGA
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3L032-D3UR

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TLLGA
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: SPI, TWI, USART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 7
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: AT32UC3L-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 9 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

19.6.5
19.6.5.1
19.6.5.2
19.6.5.3
19.6.5.4
32099F–11/2010
LIN Mode
Modes of operation
Receiver and Transmitter Control
Character Transmission
Character Reception
The LIN Mode provides Master node and Slave node connectivity on a LIN bus.
The LIN (Local Interconnect Network) is a serial communication protocol which efficiently sup-
ports the control of mechatronic nodes in distributed automotive applications.
The main properties of the LIN bus are:
LIN provides cost efficient bus communication where the bandwidth and versatility of CAN are
not required.
The LIN Mode enables processing LIN frames with a minimum of action from the
microprocessor.
The USART can act either as a LIN Master node or as a LIN Slave node.
The node configuration is chosen by setting the MODE field in the Mode Register (MR):
In order to avoid unpredicted behavior, any change of the LIN node configuration must be fol-
lowed by a software reset of the transmitter and of the receiver (except the initial node
configuration after a hardware reset). (See
See Section “19.6.2” on page 365.
See Section “19.6.3.1” on page 365.
See Section “19.6.3.4” on page 368.
• Single Master/Multiple Slaves concept
• Low cost silicon implementation based on common UART/SCI interface hardware, an
• Self synchronization without quartz or ceramic resonator in the slave nodes
• Deterministic signal transmission
• Low cost single-wire implementation
• Speed up to 20 kbit/s
• LIN Master Node (MODE=0xA)
• LIN Slave Node (MODE=0xB)
equivalent in software, or as a pure state machine.
Section
19.6.5.2)
AT32UC3L016/32/64
381