AT32UC3L032-D3UR Atmel, AT32UC3L032-D3UR Datasheet - Page 396

• Manufacturer Part Number: AT32UC3L032-D3UR
• Description: MCU AVR32 32KB FLASH 48TLLGA
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3L032-D3UR

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TLLGA
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: SPI, TWI, USART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 7
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: AT32UC3L-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 9 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Figure 19-33. Master Node with Peripheral DMA Controller (PDCM=0)
19.6.8.2
Figure 19-34. Slave Node with Peripheral DMA Controller
32099F–11/2010
WRITE BUFFER
WRITE BUFFER
DA TA 0
DA TA N
DATA 1
DATA 0
DATA N
|
|
|
|
|
|
|
|
Slave Node Configuration
Peripheral DMA
Peripheral DMA
Controller
Controller
In this configuration, the Peripheral DMA Controller transfers only the DATA. The Identifier must
be read by the user in the LIN Identifier register (LINIR). The LIN mode must be written by the
user in the LIN Mode register (LINMR).
The WRITE buffer contains the DATA if the USART sends the response (NACT=PUBLISH).
T h e R E A D b u f f e r c o n t a i n s t h e D A T A i f t h e U S A R T r e c e i v e s t h e r e s p o n s e
(NACT=SUBSCRIBE).
IMPORTANT: if the NACT configuration for a frame is PUBLISH, the US_LINMR register, must
be write with NACT=PUBLISH even if this field is already correctly configured, that in order to set
the TXREADY flag and the corresponding Peripheral DMA Controller write transfer request.
P eriphe ral
TXRDY
Peripheral
bus
RXRDY
bus
NODE ACTION = PUBLISH
CONTROLLER
USART LIN
CONTROLLER
USART LIN
READ BUFFER
READ BUFFER
DATA 0
DA TA N
|
|
|
|
DATA 0
DATA N
|
|
|
|
Peripheral DMA
AT32UC3L016/32/64
Controller
Peripheral DMA
Controller
Peripheral
TXRDY
RXRDY
bus
P eripheral
RXRDY
Bus
NODE ACTION = SUBSCRIBE
CONTROLLER
NACT = SUBSCRIBE
USART LIN
CONTROLLER
USART LIN
396