AT32UC3L032-D3UR Atmel, AT32UC3L032-D3UR Datasheet - Page 711

• Manufacturer Part Number: AT32UC3L032-D3UR
• Description: MCU AVR32 32KB FLASH 48TLLGA
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3L032-D3UR

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TLLGA
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: SPI, TWI, USART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 7
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: AT32UC3L-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 9 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

30.4
Table 30-1.
30.5
30.5.1
30.5.2
30.5.3
30.5.4
30.5.5
30.5.6
30.6
32099F–11/2010
Name
DATA
I/O Lines Description
Product Dependencies
Functional Description
I/O Lines
Power Management
Clocks
Interrupts
Debug Operation
External Components
I/O Lines Description
Description
aWire data multiplexed with the RESET_N pin.
In order to use this module, other parts of the system must be configured correctly, as described
below.
The pin used by AW is multiplexed with the RESET_N pin. The reset functionality is the default
function of this pin. To enable the aWire functionality on the RESET_N pin the user must enable
the aWire UART user interface.
If the CPU enters a sleep mode that disables clocks used by the aWire UART user interface, the
aWire UART user interface will stop functioning and resume operation after the system wakes
up from sleep mode.
The aWire UART uses the internal 120 MHz RC oscillator (RC120M) as clock source for its
operation. When using the aWire UART user interface RC120M must enabled using the Clock
Request Register (see
The clock for the aWire UART user interface (CLK_AW) is generated by the Power Manager.
This clock is enabled at reset, and can be disabled in the Power Manager. It is recommended to
disable the aWire UART user interface before disabling the clock, to avoid freezing the aWire
UART user interface in an undefined state.
The aWire UART user interface interrupt request line is connected to the interrupt controller.
Using the aWire UART user interface interrupt requires the interrupt controller to be pro-
grammed first.
If the AW is used for debugging the aWire UART user interface will not be usable.
When an external debugger forces the CPU into debug mode, the aWire UART user interface
continues normal operation. If the aWire UART user interface is configured in a way that
requires it to be periodically serviced by the CPU through interrupts or similar, improper opera-
tion or data loss may result during debugging.
The AW needs an external pullup on the RESET_N pin to ensure that the pin is pulled up when
the bus is not driven.
The aWire UART user interface can be used as a spare Asynchronous Receiver or Transmitter
when AW is not used for debugging.
Section
30.6.1).
AT32UC3L016/32/64
Type
Input/Output
711