AT32UC3L032-D3UR Atmel, AT32UC3L032-D3UR Datasheet - Page 763

• Manufacturer Part Number: AT32UC3L032-D3UR
• Description: MCU AVR32 32KB FLASH 48TLLGA
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3L032-D3UR

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TLLGA
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: SPI, TWI, USART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 7
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: AT32UC3L-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 9 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

31.5.4
31.5.4.1
31.5.4.2
32099F–11/2010
JTAG Data Registers
Device Identification Register
Reset Register
The following device specific registers can be selected as JTAG scan chain depending on the
instruction loaded in the JTAG Instruction Register. Additional registers exist, but are implicitly
described in the functional description of the relevant instructions.
The Device Identification Register contains a unique identifier for each product. The register is
selected by the IDCODE instruction, which is the default instruction after a JTAG reset.
Device specific ID codes
The different device configurations have different JTAG ID codes, as shown in
Note that if the flash controller is statically reset, the ID code will be undefined
Table 31-29. Device and JTAG ID
The reset register is selected by the AVR_RESET instruction and contains one bit for each reset
domain in the device. Setting each bit to one will keep that domain reset until the bit is cleared.
Bit
Device ID
Revision
Part Number
Manufacturer ID
Device Name
AT32UC3L064
AT32UC3L032
AT32UC3L016
System
31
MSB
Revision
4 bits
This is a 4 bit number identifying the revision of the component.
Rev A = 0x0, B = 0x1, etc.
The part number is a 16 bit code identifying the component.
The Manufacturer ID is a 11 bit code identifying the manufacturer.
The JTAG manufacturer ID for ATMEL is 0x01F.
Resets the whole chip, except the JTAG itself.
JTAG ID Code (R is the revision number)
0xR203003F
0xR203403F
0xR203803F
28
27
Part Number
Bit
Reset
domain
16 bits
12
11
System
0
AT32UC3L016/32/64
Manufacturer ID
11 bits
.
1
Table
LSB
1 bit
31-29.
0
1
763