AT32UC3L032-D3UR Atmel, AT32UC3L032-D3UR Datasheet - Page 668

• Manufacturer Part Number: AT32UC3L032-D3UR
• Description: MCU AVR32 32KB FLASH 48TLLGA
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3L032-D3UR

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TLLGA
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: SPI, TWI, USART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 7
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: AT32UC3L-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 9 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

AT32UC3L016/32/64
Problems with QMatrix acquisition of small sense capapcitor voltages can be solved by connect-
ing the negative reference pin (ACREFN) to a voltage divider that produces a small positive
voltage (20 mV, typically) to cancel any negative input offset voltage. With a 3.3V supply, recom-
mended values for the voltage divider are Ra (resistor from positive supply to ACREFN) of 8200
ohm and Rb (resistor from ACREFN to ground) of 50 ohm. These recommended values will pro-
duce 20 mV on the ACREFN pin, which should generally be enough to compensate for the
worst-case negative input offset of the analog comparators.
Unfortunately, such a voltage divider constantly draws a small current from the power supply,
reducing battery life in portable applications. In order to prevent this constant power drain, the
CAT module provides a voltage divider enable pin (VDIVEN) that can be used for driving the
voltage divider. The VDIVEN pin provides power to the voltage divider only when the compara-
tors are actually performing QMatrix comparisions. When the comparators are inactive, the
VDIVEN output is zero. This minimizes the power consumed by the voltage divider.
668
32099F–11/2010