AT32UC3L032-D3UR Atmel, AT32UC3L032-D3UR Datasheet - Page 780

• Manufacturer Part Number: AT32UC3L032-D3UR
• Description: MCU AVR32 32KB FLASH 48TLLGA
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3L032-D3UR

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TLLGA
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: SPI, TWI, USART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 7
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: AT32UC3L-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 9 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

31.6.8.5
31.6.8.6
31.6.8.7
Table 31-58. STATUS_INFO Contents
32099F–11/2010
Bit number
15-9
4-1
8
7
6
5
0
MEMORY_READWRITE_STATUS
BAUD_RATE
STATUS_INFO
Name
Reserved
Reserved
Protected
SAB busy
Chip erase ongoing
CPU halted
Reset status
After a MEMORY_WRITE command this response is sent by AW. The response can also be
sent after a MEMORY_READ command if AW encountered an error when receiving the
address. The response contains 3 bytes, where the first is the status of the command and the 2
next contains the byte count when the first error occurred. The first byte is encoded this way:
Table 31-55. MEMORY_READWRITE_STATUS Status Byte
Table 31-56. MEMORY_READWRITE_STATUS Details
The current baud rate in the AW. See
Table 31-57. BAUD_RATE Details
A status message from AW.
status byte
0x00
0x01
0x02
Other
Response
Response value
Additional data
Response
Response value
Additional data
Description
The protection bit in the internal flash is set. SAB access is restricted. This bit
will read as one during reset.
The SAB bus is busy with a previous transfer. This could indicate that the CPU
is running on a very slow clock, the CPU clock has stopped for some reason
or that the part is in constant reset.
The Chip erase operation has not finished.
This bit will be set if the CPU is halted. This bit will read as zero during reset.
This bit will be set if AW has reset the CPU using the RESET command.
Description
Write successful
SAB busy
Bus error (wrong address)
Reserved
Details
0xC2
Status byte and byte count (2 bytes)
Details
0xC3
Baud rate
Section 31.6.6.7
for more details.
AT32UC3L016/32/64
780