AT32UC3L032-D3UR Atmel, AT32UC3L032-D3UR Datasheet - Page 246

• Manufacturer Part Number: AT32UC3L032-D3UR
• Description: MCU AVR32 32KB FLASH 48TLLGA
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3L032-D3UR

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TLLGA
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: SPI, TWI, USART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 7
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: AT32UC3L-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 9 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

14. Asynchronous Timer (AST)
14.1
14.2
32099F–11/2010
Features
Overview
Rev: 3.0.0.1
•
•
•
•
•
•
•
The Asynchronous Timer (AST) enables periodic interrupts and periodic peripheral events, as
well as interrupts and peripheral events at a specified time in the future. The AST consists of a
32-bit prescaler which feeds a 32-bit up-counter. The prescaler can be clocked from five differ-
ent clock sources, including the low-power 32KHz oscillator, which allows the AST to be used as
a real-time timer with a maximum timeout of more than 100 years. Also, the PB clock or a
generic clock can be used for high-speed operation, allowing the AST to be used as a general
timer.
The AST can generate periodic interrupts and peripheral events from output from the prescaler,
as well as alarm interrupts and peripheral events, which can trigger at any counter value. Addi-
tionally, the timer can trigger an overflow interrupt and peripheral event, and be reset on the
occurrence of any alarm. This allows periodic interrupts and peripheral events at very long and
accurate intervals.
To keep track of time during shutdown the AST can run while the rest of the core is powered off.
This will reduce the power consumption when the system is idle. The AST can also wake up the
system from shutdown using either the alarm wakeup, periodic wakeup. or overflow wakeup
mechanisms.
The AST has been designed to meet the system tick and Real Time Clock requirements of most
embedded operating systems.
32-bit counter with 32-bit prescaler
Clocked Source
Operation and wakeup during shutdown
Optional calendar mode supported
Digital prescaler tuning for increased accuracy
Periodic interrupt(s) and peripheral event(s) supported
Alarm interrupt(s) and peripheral event(s) supported
– System RC oscillator (RCSYS)
– 32KHz crystal oscillator (OSC32K)
– PB clock
– Generic clock (GCLK)
– 1KHz clock from 32KHz oscillator
– Optional clear on alarm
AT32UC3L016/32/64
246