AT32UC3L032-D3UR Atmel, AT32UC3L032-D3UR Datasheet - Page 411

• Manufacturer Part Number: AT32UC3L032-D3UR
• Description: MCU AVR32 32KB FLASH 48TLLGA
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3L032-D3UR

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TLLGA
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: SPI, TWI, USART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 7
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: AT32UC3L-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 9 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
32099F–11/2010
LINCE: LIN Checksum Error
LINIPE: LIN Identifier Parity Error
LINISFE: LIN Inconsistent Synch Field Error
LINBE: LIN Bit Error
CTS: Image of CTS Input
CTSIC: Clear to Send Input Change Flag
LINTC: LIN Transfer Completed
LINID: LIN Identifier
NACK: Non Acknowledge
RXBUFF: Reception Buffer Full
ITER/UNRE: Max number of Repetitions Reached or SPI Underrun Error
TXEMPTY: Transmitter Empty
TIMEOUT: Receiver Time-out
PARE: Parity Error
FRAME: Framing Error
0: No LIN Checksum Error has been detected since the last RSTSTA.
1: A LIN Checksum Error has been detected since the last RSTSTA.
0: No LIN Identifier Parity Error has been detected since the last RSTSTA.
1: A LIN Identifier Parity Error has been detected since the last RSTSTA.
0: No LIN Inconsistent Synch Field Error has been detected since the last RSTSTA
1: The USART is configured as a Slave node and a LIN Inconsistent Synch Field Error has been detected since the last
RSTSTA.
0: No Bit Error has been detected since the last RSTSTA.
1: A Bit Error has been detected since the last RSTSTA.
0: CTS is at 0.
1: CTS is at 1.
0: No input change has been detected on the CTS pin since the last read of CSR.
1: At least one input change has been detected on the CTS pin since the last read of CSR.
0: The USART is idle or a LIN transfer is ongoing.
1: A LIN transfer has been completed since the last RSTSTA.
0: No LIN Identifier received or sent
1: The USART is configured as a Slave node and a LIN Identifier has been received or the USART is configured as a Master
node and a LIN Identifier has been sent since the last RSTSTA.
0: No Non Acknowledge has not been detected since the last RSTNACK.
1: At least one Non Acknowledge has been detected since the last RSTNACK.
0: The signal Buffer Full from the Receive Peripheral DMA Controller channel is inactive.
1: The signal Buffer Full from the Receive Peripheral DMA Controller channel is active.
If USART does not operate in SPI Slave Mode (MODE … 0xF):
ITER = 0: Maximum number of repetitions has not been reached since the last RSTSTA.
ITER = 1: Maximum number of repetitions has been reached since the last RSTSTA.
If USART operates in SPI Slave Mode (MODE = 0xF):
UNRE = 0: No SPI underrun error has occurred since the last RSTSTA.
UNRE = 1: At least one SPI underrun error has occurred since the last RSTSTA.
0: There are characters in either THR or the Transmit Shift Register, or the transmitter is disabled.
1: There are no characters in THR, nor in the Transmit Shift Register.
0: There has not been a time-out since the last Start Time-out command (STTTO in CR) or the Time-out Register is 0.
1: There has been a time-out since the last Start Time-out command (STTTO in CR).
0: No parity error has been detected since the last RSTSTA.
1: At least one parity error has been detected since the last RSTSTA.
0: No stop bit has been detected low since the last RSTSTA.
AT32UC3L016/32/64
411