TMPM382FSFG Toshiba, TMPM382FSFG Datasheet - Page 386

• Manufacturer Part Number: TMPM382FSFG
• Manufacturer: Toshiba

Specifications of TMPM382FSFG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 64K
• Rom Type: Flash
• Ram (kbytes): 8K
• Number Of Pins: 64
• Package: QFP(14x14)
• Vcc: 5V
• Cpu Mhz: 40
• Ssp (ch) Spi: 1
• I2c/sio (ch): 1
• Uart/sio (ch): 3
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: N
• Cs/wait Controller (ch): -
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: -
• 12-bit Ad Converter: 10
• 16-bit Timer / Counter: 6
• Motor / Igbt Control: Y
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: Y
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: Y
• Hardware Cec Controller: -
• Comparators: -
• Low-voltage Detector: Y
• Etm Hardware Trace: 2-bit

SC0TFC
13.4.10 TX FIFO configuration register
<TFCS>:
<TFIS>:
<TIL1:0>:
(Note 1)
(Note 2)
bit Symbol
Read/Write
After reset
Function
To use TX/RX FIFO buffer, TX/RX FIFO must be cleared after setting the SIO transfer
Set the SC0TFC register again After the following operation
mode (half duplex/full duplex) and enabling FIFO (SC0FCNF<CNFG> = "1").
SC0EN<SIOE> = "0" (SIO operation stop)
SC0MOD1<I2SC> = "0" (operation is prohibited in IDLE mode) and releasing the
low power consumption mode which started by the WFI (Wait For Interrupt)
instruction.
Clears TX FIFO.
Setting “1” clears TX FIFO and “0” is always read.
Selects interrupt generation condition.
0: An interrupt is generated when the data reaches to the specified fill level.
1: An interrupt is generated when the data reaches to the specified fill level or the data
cannot reach the specified fill level at the time new data is read.
Selects FIFO fill level
00
01
10
11
TX FIFO
clear
1:Clear
Always
reads “0”.
TFCS
Other than full
duplex
Empty
1byte
2byte
3byte
W
7
0
Select
interrupt
generation
condition
0: when the
data reaches
to the
specified fill
level.
1: when the
data reaches
to the
specified fill
level or the
data cannot
reach the
specified fill
level at the
time new data
is read.
TFIS
R/W
6
0
.
TMPM380/M382 - 37 / 52 -
Full duplex
Empty
1byte
Empty
1byte
“0” is read.
5
4
R
0
3
2
FIFO fill level to generate TX
interrupts.
00:Empty
01:1byte
10:2byte
11:3byte
TIL1
1
0
TMPM380/M382
R/W
TIL0
0
0