TMPM382FSFG Toshiba, TMPM382FSFG Datasheet - Page 66

• Manufacturer Part Number: TMPM382FSFG
• Manufacturer: Toshiba

Specifications of TMPM382FSFG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 64K
• Rom Type: Flash
• Ram (kbytes): 8K
• Number Of Pins: 64
• Package: QFP(14x14)
• Vcc: 5V
• Cpu Mhz: 40
• Ssp (ch) Spi: 1
• I2c/sio (ch): 1
• Uart/sio (ch): 3
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: N
• Cs/wait Controller (ch): -
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: -
• 12-bit Ad Converter: 10
• 16-bit Timer / Counter: 6
• Motor / Igbt Control: Y
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: Y
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: Y
• Hardware Cec Controller: -
• Comparators: -
• Low-voltage Detector: Y
• Etm Hardware Trace: 2-bit

7.5
External
interrupt
pin
7.5.1
handles an interrupt request with the highest priority.
generator. Therefore setting of the clock generator is required.
7.5.1.1 Interrupt route
This chapter describes routes, factors and required settings of interrupts.
The CPU is notified of interrupts by each signal of interrupt factor. It sets priority on the interrupts and
The CPU is notified of the interrupt factor, which is used for clearing the standby modes, via a clock
Fig 7-1 shows an interrupt request route.
Interrupt
Interrupt factors
Port
Peripheral
Peripheral
IP
IP
TMPM380/M382 - 11 / 59 -
Fig 7-1 Interrupt Route
Clock generator
Clearing
standby
mode
Interrupt request
CPU
TMPM380/M382