MPC564MZP66 Freescale Semiconductor, MPC564MZP66 Datasheet - Page 1321

• Manufacturer Part Number: MPC564MZP66
• Description: IC MCU 512K FLASH 66MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP66

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Figure G-4
G.9.2
A less stringent power-up sequence may be implemented if 2.6-V compliant pins and dual 2.6-V/5-V
compliant pins are NOT connected to the 5-V supply with a pull-up resistor or driven by 5-V logic during
power-up/down.
The option B power-up sequence (excluding V
Thus the V
no adverse affects to the device.
The requirement that V
dual 2.6-V/5-V compliant pins and 2.6-V pins. The diodes are forward biased when V
V
Figure G-5
power-up sequence if a keep-alive supply is required. The keep-alive supply should be powered-up at the
same time or before both the high voltage and low voltage supplies are powered-up.
Freescale Semiconductor
DDH
1. V
V
V
and will start to conduct current.
DDH
DDL
DDH
DDH
illustrates the power-up sequence if no keep-alive supply is required.
illustrates the power-down sequence if a keep-alive supply is required.
Power-Up/Down Option B
> V
supply group can be fully powered-up prior to power-up of the V
DDL
V
V
Figure G-4. Option A Power-Down Sequence With Keep-Alive Supply
DDH
DDH
- 0.5 V (V
DDH
≥ V
cannot lag V
DDL
cannot lag V
0.5-V Max
- 0.5 V (V
MPC561/MPC563 Reference Manual, Rev. 1.2
DDH
DDL
by more than 3.1 V.
DDH
cannot lag V
DDL
cannot lead V
by more than 0.5 V is due to ESD diodes in the pad logic for
DDKA
DDL
) is:
DDL
by more than 0.5 V)
3.1-V Max
by more than 0.5 V.)
Ramp down rates may
differ with load.
66-MHz Electrical Characteristics
V
Figure G-6
DDKA
DDL
supply group, with
DDL
is greater than
illustrates the
G-15