R88M-W75030T-S1 Omron, R88M-W75030T-S1 Datasheet - Page 180

• Manufacturer Part Number: R88M-W75030T-S1
• Description: SERVO MOTOR 750W 200V
• Manufacturer: Omron

Specifications of R88M-W75030T-S1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: R88MW75030TS1

■
Note 1. Make 1.5 turns for the ferrite core's cable winding.
Note 2. Peel the insulation off the cable at the clamp, and directly connect the shield to the metal
Note 3. For single-phase power supply input models (R88D-WNA5@ to R88D-WN04@, R88D-
• Ground the motor's frame to the machine ground when the motor is on a movable shaft.
• Use a grounding plate for the frame ground for each Unit, as shown in the above diagrams, and
• Use ground lines with a minimum thickness of 3.5 mm
• If no-fuse breakers are installed at the top and the power supply line is wired from the lower duct,
• No-fuse breakers, surge absorbers, and noise filters should be positioned near the input terminal
• The noise filter should be installed at the entrance to the control box whenever possible. Wire the
Class-3 ground
(to 100 Ω or less)
3-24
System Design and Installation
AC power
supply
ground to a single point.
lines are as short as possible.
use metal tubes for wiring and make sure that there is adequate distance between the input lines
and the internal wiring. If input and output lines are wired together, noise resistance will decrease.
block (ground plate), and I/O lines should be isolated and wired using the shortest distance possi-
ble.
noise filter as shown in the following illustrations.
Wiring Method
Metal
duct or
conduit
plate.
WN08H), the main-circuit power supply input terminals will be L1 and L2.
Control box
Metal plate
NFB
Ground plate
Surge absorber
2 m max.
2 m max.
Controller power supply
Noise
filter
Noise
filter
Brake
power
supply
Contactor
R88D-WN@-ML2
L1C
L2C
See note 3.
L1
L2
L3
Controller
CN1
2
CN2
, and arrange the wiring so that the ground
W
U
V
Ferrite core
Ferrite core
Clamp
Ferrite core
Clamp
Ferrite
core
Metal
duct or
conduit
Motor built-in device
Ferrite
core
Ferrite
core
Chapter 3
R88M-W@
M
B
E