R88M-W75030T-S1 Omron, R88M-W75030T-S1 Datasheet - Page 264

• Manufacturer Part Number: R88M-W75030T-S1
• Description: SERVO MOTOR 750W 200V
• Manufacturer: Omron

Specifications of R88M-W75030T-S1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: R88MW75030TS1

• When connecting to the CJ1W-NCF71 or CS1W-NCF71, always use the default setting (4) or a set-
Setting Explanation
Note Do not change setting.
Setting Explanation
• Enables or disables software limits. Software limit function settings are executed according to the
Note Do not change setting.
4-68
Operation
Pn800.2
Setting
range
0 to F
Pn800.3
Setting
range
Pn801.0
Setting
range
0
1
2
3
Pn801.1
Setting
range
Pn801.2
Setting
range
ting of 0.
next user constant. Software limits are enabled in the cases described below. In all other cases,
software limits do not go into effect even when the software limit range is exceeded.
Set enable/disable with the above setting method described above.
Setting
Setting
When the origin is established (when the No-origin Flag is OFF for the CJ1W-NCF71, CS1W-
MCH71, CJ1W-MCH71)
When an infinite length axis is used (CS1W-MCH71, CJ1W-MCH71)
Detects communications errors (A.E60) if errors occur consecutively for the set value plus two
times.
Software limit enabled.
Forward software limit disabled.
Reverse software limit disabled.
Forward/reverse software limits disabled.
Communications control -- Communications error count at single transmission (All operation
modes)
0 to F
Communications control -- Not used.
---
Function selection application 6 (software LS) -- Software limit function (All operation modes)
0 to 3
Function selection application 6 (software LS) -- Not used.
---
Function selection application 6 (software LS) -- Software limit check using reference (Position)
0, 1
Unit
Unit
Unit
Unit
Unit
---
---
---
---
---
Explanation
Explanation
setting
Default
setting
setting
Default
setting
Default
setting
Default
Default
0
0
3
0
0
Restart
power?
Restart
power?
Restart
power?
Restart
power?
Restart
power?
Chapter 4
No
No
No
No
No