SAM9G10 Atmel Corporation, SAM9G10 Datasheet - Page 535

• Manufacturer Part Number: SAM9G10
• Manufacturer: Atmel Corporation

Specifications of SAM9G10

• Flash (kbytes): 0 Kbytes
• Pin Count: 217
• Max. Operating Frequency: 266 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 96
• Ext Interrupts: 96
• Usb Transceiver: 3
• Usb Speed: Full Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 1
• Uart: 4
• Ssc: 3
• Sd / Emmc: 1
• Graphic Lcd: Yes
• Video Decoder: No
• Camera Interface: No
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 16
• Self Program Memory: NO
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.08 to 1.32
• Fpu: No
• Mpu / Mmu: No/Yes
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

Figure 32-4. UHP Clock Trees
32.4.3
11053B–ATARM–22-Sep-11
11053B–ATARM–22-Sep-11
Interrupt
MCK
AHB
For OHCI Full-speed operations only, the user has to perform the following:
The USB host interface has an interrupt line connected to the Advanced Interrupt Controller
(AIC).
Handling USB host interrupts requires programming the AIC before configuring the UHP HS.
• Select UPLLCK as Input clock of OHCI part, USBS bit in PMC_USB register.
• Program the OHCI clocks (UHP48M and UHP12M) with USBDIV field in PMC_USB register.
• Enable OHCI clocks, UHP bit in PMC_SCER register.
• Enable UHP peripheral clock, bit (1 << AT91C_ID_UHPHS) in PMC_PCER register.
• Select PLLACK as Input clock of OHCI part, USBS bit in PMC_USB register.
• Program the OHCI clocks (UHP48M and UHP12M) with USBDIV field in PMC_USB register.
• Enable the OHCI clocks, UHP bit in PMC_SCER register.
USBDIV must be 9 (division by 10) if UPLLCK is selected.
USBDIV value is to calculated regarding the PLLACK value and USB Full-speed accuracy.
Interface
Interface
Interface
Interface
Master
Master
OHCI
OHCI
EHCI
EHCI
User
User
Host Controller
Host Controller
USB 1.1 OHCI
USB 2.0 EHCI
OHCI clocks
Root Hub
Host SIE
Router
and
Port
30 MHz
30 MHz
UTMI transceiver
UTMI transceiver
UPLL (480 MHz)
FS transceiver
SAM9G35
SAM9G35
535
535