MK30DN512ZVLK10 Freescale Semiconductor, MK30DN512ZVLK10 Datasheet - Page 478

no-image

MK30DN512ZVLK10

Manufacturer Part Number
MK30DN512ZVLK10
Description
ARM Microcontrollers - MCU KINETIS 512K SLCD
Manufacturer
Freescale Semiconductor
Datasheet

Specifications of MK30DN512ZVLK10

Core
ARM Cortex M4
Processor Series
K30
Data Bus Width
32 bit
Maximum Clock Frequency
50 MHz
Program Memory Size
512 KB
Data Ram Size
128 KB
On-chip Adc
Yes
Operating Supply Voltage
1.71 V to 3.6 V
Operating Temperature Range
- 40 C to + 105 C
Package / Case
LQFP-80
Mounting Style
SMD/SMT

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MK30DN512ZVLK10
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
Introduction
22.1.2 Modes of Operation
This section describes the module's operating modes.
22.1.2.1 Stop Mode
When the EWM is in stop mode, the CPU services to the EWM cannot occur. On entry to
stop mode, the EWM’s counter freezes.
There are two possible ways to exit from Stop mode:
Note the following if the EWM enters the stop mode during CPU service mechanism: At
the exit from stop mode by an interrupt, refresh mechanism state machine starts from the
previous state which means, if first service command is written correctly and EWM
enters the stop mode immediately, the next command has to be written within the next 15
(EWM_service_time) peripheral bus clocks after exiting from stop mode. User must mask
all interrupts prior to executing EWM service instructions.
478
• Windowed refresh option
• Robust refresh mechanism
• One output port, EWM_out, when asserted is used to reset or place the external
• One Input port, EWM_in, allows an external circuit to control the EWM_out signal.
• On exit from stop mode through a reset, the EWM remains disabled.
• On exit from stop mode by an interrupt, the EWM is re-enabled, and the counter
circuit into safe mode.
continues to be clocked from the same value prior to entry to stop mode.
• Provides robust check that program flow is faster than expected.
• Programmable window.
• Refresh outside window leads to assertion of EWM_out.
• Write values of 0xB4 and 0x2C to EWM Refresh Register within 15
(EWM_service_time) peripheral bus clock cycles.
K30 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.

Related parts for MK30DN512ZVLK10