MK30DN512ZVLK10 Freescale Semiconductor, MK30DN512ZVLK10 Datasheet - Page 988

• Manufacturer Part Number: MK30DN512ZVLK10
• Description: ARM Microcontrollers - MCU KINETIS 512K SLCD
• Manufacturer: Freescale Semiconductor

Specifications of MK30DN512ZVLK10

• Core: ARM Cortex M4
• Processor Series: K30
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 512 KB
• Data Ram Size: 128 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.71 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• Package / Case: LQFP-80
• Mounting Style: SMD/SMT

Introduction
Furthermore, the new major features below are also provided in addition to the previous
FlexCAN version:
41.1.3 Modes of Operation
The FlexCAN module has four functional modes: Normal Mode (User and Supervisor),
Freeze Mode, Listen-Only Mode and Loop-Back Mode. There are also three low power
modes: Disable Mode, Doze Mode and Stop Mode.
988
• Short latency time due to an arbitration scheme for high-priority messages
• Low power modes, with programmable wake up on bus activity
• Remote request frames may be handled automatically or by software
• Safe mechanism for ID Filter configuration in Normal Mode
• CAN bit time settings and configuration bits can only be written in "Freeze" mode
• Tx mailbox status (Lowest priority buffer or empty buffer)
• IDHIT register for received frames
• SYNC bit status to inform that the module is synchronous with CAN bus
• Debug Registers
• CRC status for transmitted message
• Rx FIFO Global Mask register
• Selectable priority of reception between Mailboxes and Rx FIFO during matching
• Powerful Rx FIFO ID filtering, capable of matching incoming IDs against either 128
• 100% backward compatibility with previous FlexCAN version
• Normal Mode (User or Supervisor):
• Freeze Mode:
process
extended, 256 standard or 512 partial (8 bits) IDs, with up to 32 individual masking
capability
In Normal Mode, the module operates receiving and/or transmitting message frames,
errors are handled normally and all the CAN Protocol functions are enabled. User
and Supervisor Modes differ in the access to some restricted control registers.
K30 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.