MK30DN512ZVLK10 Freescale Semiconductor, MK30DN512ZVLK10 Datasheet - Page 893

• Manufacturer Part Number: MK30DN512ZVLK10
• Description: ARM Microcontrollers - MCU KINETIS 512K SLCD
• Manufacturer: Freescale Semiconductor

Specifications of MK30DN512ZVLK10

• Core: ARM Cortex M4
• Processor Series: K30
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 512 KB
• Data Ram Size: 128 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.71 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• Package / Case: LQFP-80
• Mounting Style: SMD/SMT

36.4.16.3 Fault Inputs Polarity Control
The FLTjPOL bit selects the fault input j polarity (where j = 0, 1, 2, 3).
36.4.17 Polarity Control
The POLn bit selects the channel (n) output polarity.
Freescale Semiconductor, Inc.
• If FLTjPOL = 0, the fault j input polarity is high, so the logical one at the fault input j
• If FLTjPOL = 1, the fault j input polarity is low, so the logical zero at the fault input j
• If POLn = 0, the channel (n) output polarity is high, so the logical one is the active
• If POLn = 1, the channel (n) output polarity is low, so the logical zero is the active
indicates a fault.
indicates a fault.
state and the logical zero is the inactive state.
state and the logical one is the inactive state.
channel (n) output
channel (n) output
(after fault control with
manual fault clearing
(before fault control)
NOTE
The channel (n) output is after the fault control with manual fault clearing and POLn = 0.
FAULTIN bit
and POLn=0)
FAULTF bit
FTM counter
Figure 36-236. Fault Control with Manual Fault Clearing
K30 Sub-Family Reference Manual, Rev. 6, Nov 2011
the beginning of new PWM cycles
FAULTF bit is cleared
Chapter 36 FlexTimer (FTM)
893